Atur jumlah dan catatan
Stok Total: 22
Subtotal
Rp950.000
Fire Relay Module Notifier FRM-1 Modul FRM 1
Rp950.000
FRM-1 Relay Module Feature
- Built-in type identification automatically identifies these devices to the control panel.
- Internal circuitry and relay powered directly by two-wire SLC loop.
- Integral LED “blinks” green each time a communication is received from the control panel and turns on in steady red when activated.
- LED blink may be deselected globally (affects all devices).
- High noise immunity (EMF/RFI).
- Wide viewing angle of LED.
- Direct-dial entry of address 01– 159 for FlashScan loops, 01 – 99 for CLIP mode loops.
- Compatible with FlashScan and CLIP protocol systems
Spesification :
- Normal Operating Voltage : 15 to 32VDC
- Max Current draw : 6.5mA (LED on)
- Average operating current : 230 μA direct poll; 255 μA group poll.
- Temperature range : 0°C to 49°C.
- Humidity range : 10% to 93% non-condensing
- Built-in type identification automatically identifies these devices to the control panel.
- Internal circuitry and relay powered directly by two-wire SLC loop.
- Integral LED “blinks” green each time a communication is received from the control panel and turns on in steady red when activated.
- LED blink may be deselected globally (affects all devices).
- High noise immunity (EMF/RFI).
- Wide viewing angle of LED.
- Direct-dial entry of address 01– 159 for FlashScan loops, 01 – 99 for CLIP mode loops.
- Compatible with FlashScan and CLIP protocol systems
Spesification :
- Normal Operating Voltage : 15 to 32VDC
- Max Current draw : 6.5mA (LED on)
- Average operating current : 230 μA direct poll; 255 μA group poll.
- Temperature range : 0°C to 49°C.
- Humidity range : 10% to 93% non-condensing
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan