Pro Micro ATMEGA32U4 5V/16MHZ module With the bootloader for arduino MINI USB/Micro USB with 2 row pin header for arduino

SELAMAT DATANG DI TOKO KAMI Condition : New Type : Module Origin : Mainland China The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface. This tiny little board does all work for Arduino tricks that you #39;re familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite for Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 6V(Blue board)/ 18V(Black board). If you #39;re supplying unregulated power to the board, be sure to connect to the #34;RAW #34; pin on not VCC. This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We #39;ve also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit. Features: ATMega 32U4 running at 5V/16MHz Supported under for Arduino IDE v1.0.1 On-Board MINI USB connector for programming 4 x 10-bit ADC pins 12 x Digital I/Os (5 are PWM capable) Rx and Tx Hardware Serial Connections Our Smallest for Arduino-Compatible Board Yet! Sebelum membeli suatu produk, Mohon dapat membaca deskripsi produk dengan cermat Harap tanyakan stok sebelum melakukan pemesanan ya kak Jika Anda memiliki pertanyaan, silakan hubungi kami.