DT01 Digital Temperature Controller 30A Support 18B20 Sensor Module

SELAMAT DATANG DI TOKO KAMI Is Smart Device : No Usage : Industrial Display Size : 1.9 Inches amp; Under Brand Name : Gaqqee Certification : CE Origin : Mainland China DT01 Digital Temperature Controller 30A Support 18B20 Sensor Module Relay Rail Digital Thermostat with 0.5M 10K probe Product selling points: 1: Widely used 2: Large current 30A relay 3: Support 18B20 sensor, shipping default NTC 10K temperature probe 4: Simple operation 5: Guide rail type digital thermostat Product Features: 1. Heating mode H: When the detected temperature the set temperature-the differential temperature, the relay is turned on and the heating device starts to work; When the detected temperature the set temperature, the relay is disconnected and the heating device stops working; 2. Cooling mode C: When the detected temperature the set temperature + the differential temperature, the relay is turned on and the refrigeration equipment starts to work; When the detected temperature the set temperature, the relay is disconnected and the refrigeration equipment stops working; 3. High temperature alarm function ALA: When the actual temperature the alarm temperature, the system turns on the sound and light alarm, and disconnects the relay, and any key stops the sound and light; 4. Delay start OPH: After finishing a normal heating or cooling work, the system starts timing T, only after TOPH, the system can perform the next round of heating or cooling work; 5. Temperature correction function OFE (-10.0~10.0): When the system works for a long time, there may be deviations. Through this function, the actual temperature = measured temperature + calibration value; 6. Relay enable (open by default): If the relay enable is turned off, the relay remains off; 7. Restore factory settings: Press the STOP and SET buttons at the same time for more than 3 seconds to restore