10pcs 6Pin 12mm Cut-End Snap On Clip Connector Socket 2.0mm Pin Picth

10pcs 6Pin 12mm Cut-End Snap On Clip Connector Socket 2.0mm Pin Picth

Deskripsi :

Model Number : 6pin rgb+cct 2.0MM
Brand Name : veromount
Origin : Mainland China
Certification : CE
Place of Origin : Guangdong China (Mainland)


About this item
ATTENTION -- SELECT THE CORRECT VERSION: Philips makes TWO versions of their lightstrips (Standard 6-Pin V3 and Micro 6-Pin V4).
The Micro 6-Pin V4 has a smaller pin connection and is bluetooth compatible, while the Standard 6-Pin V3 features larger pins and is NOT bluetooth compatible.
Please note V3 is 2.0mm Pin Pitch while V4 is 1.27mm Pin Pitch.

NOTE: This product is NOT compatible with Hue Play and Hue Gradient lightstrips.
ENDLESS DESIGN -- create breaks in your lightstrips, run lights under cabinets, create lighting for shelves, or connect lightstrips across an entire room -- the possibilities are endless!
EASY INSTALLATION -- easy to use! Our cables are flat & flexible AND all pin connectors are removable.
TECH SPECS -- designed for the Philips Lightstrip system, supports runs up to 33 feet (10 meters), cable is UL listed, made for indoor locations only.
REQUIRED -- if you want to connect this product directly to the Philips Lightstrip Controller, you MUST use our Controller to 6-Pin Adapter.

Directions

This socket needs to make contact with the solder points next to the cut mark on your Lightstrip Plus.
Rather than cut the Lightstrip directly on the cut mark, it is very important that you cut directly across the solder points next to the cut mark so that the solder points are cut in half. This will allow a Snap on Connector to make contact on either sides of the cut, ensuring that both sid

Terimakasih Sudah Belanja di Toko Kami.