HP Aruba R3J18A Mounting Bracket R2H28A [IAP505]

BREKET TAMBAHAN R3J18A TYPE AP R2H28A

HPE Aruba Networking AP505 Series Campus Access Points
Cost-effective Wi-Fi 6 (802.11ax) for medium-density indoor environments

Key features
• 1.49 Gbps maximum real-world speed (HE80/HE20)
• WPA3 and Enhanced Open security
• Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices
• OFDMA for enhanced multi-user efficiency
• IoT-ready Bluetooth 5 and Zigbee support

AP type Indoor, dual radio, 5 GHz and 2.4 GHz 802.11ax 2x2 MIMO
5 GHz radio Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with 2SS HE80 802.11ax
client devices
2.4 GHz radio Two spatial stream Single User (SU) MIMO for up to 574 Mbps (287 Mbps) wireless data rate with 2SS
HE40 (HE20) 802.11ax client devices
Maximum number of associated
client devices Up to 256 associated client devices per radio
Maximum number of BSSIDs 16 BSSIDs per radio
Supported frequency bands
(country-specific restrictions apply)
Available channels Dependent on configured regulatory domain
Supported radio technologies
• 802.11b: Direct-sequence spread-spectrum (DSSS)
• 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
• 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 8 resource units
Supported modulation types:
• 802.11b: BPSK, QPSK, CCK
• 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension)
• 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension)
• 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
802.11n high-throughput (HT) support: HT20/40
802.11ac very high throughput
(VHT) support: VHT20/40/80
802.11ax high efficiency (HE) support: HE20/40/80
E0: Ethernet wired network
port (RJ-45)
• Auto-sensing link speed (10/100/1000BASE-T) and MDI/MDX
• PoE-PD: 48Vdc (nominal) 802.3af/at PoE (class 3 or 4)
• 802.3az Energy Efficient Ethernet (EEE)
DC power interface 12 Vdc (nominal, +/- 5%), accepts 2.1 mm/5.5 mm center-positive circular plug with 9.5 mm length
USB 2.0 host interface
(type A connector) Capable of sourcing up to 1A / 5W to an attached device
Bluetooth low energy(BLE5.0) and
zigbee (802.15.4) radio
• BLE: up to 7 dBm transmit power (class 1) and -93 dBm receive sensitivity (1 Mbps)
• Zigbee: up to 6 dBm transmit power and -96 dBm receive sensitivity
Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 3.3 dBi
Visual indictors
(two multi-color LEDs): For system and radio status
Reset button: Factory reset, LED mode control (normal/off)
Serial console interface Proprietary, micro-B USB physical jack
Security slot Kensington security slot