DZ006 Fosc21C Wireless WIFI +USB oscilloscope 2 channel 1Mhz support laptop mobile phone (Android) handheld portable oscilloscope

Fosc21C Wireless WIFI +USB oscilloscope 2 channel 1Mhz support laptop mobile phone (Android) handheld portable oscilloscope


Sebelum order mohon dibaca rincian pd deskripsi :)



- Barang dikirim langsung dr Luar Negeri

- Estimasi pengiriman 15 Harian Sampai Alamat

- harga yang dipajang sudah full payment tapi sewaktu- waktu harga bisa saja berubah berdasarkan ketentuan cukai !!

- Packing Safety, Seller Amanah :)

- Jaminan uang kembali jika barang diterima tidak sesuai !!!
Wi-Fi + USB 2 Channels Oscilloscope
Function introduction


· It is a oscilloscope .The software and oscilloscope can be connected wirelessly, enabling physical isolation of the test site from the operator's operating site, such as high-voltage devices that cannot be accessed by the debugger, devices in hazardous environments, devices in motion, and devices that are susceptible to interference. It can not only be Wi-Fi wireless connection, but also retains the USB connection, you can use USB to connect the computer to work.


· 2 channel input, synchronous display
· Automatic measurement of amplitude, 4 measurement modes optional
· Input capture (trigger) function
· Any channel can be set as a capture (trigger) source
· Can set rising or falling edge capture (trigger) signal
· Capture (trigger) signal level adjustable
· Data can be saved to the computer, automatically transferred to the saved data when the software is started
· Data can be backed up, and later at any time to view the backup data waveform
· Can display two channels of differential signal
· Lock signal to expand and compress waveforms up to 90 hours
· Suitable for monitoring the operation of electrical equipment for a long time and archiving
· Suitable for collecting and archiving data such as temperature, humidity and light for a long time


Technical Parameters


· Wireless Communication: Wi-Fi 2.4G
· Interface type: Micro USB 2.0
· Signal input interface type: BNC interface, connected with the oscilloscope probe line
· Maximum sampling rate:
1MHz ( 2*1MHz )
· Operating voltage: 5 V Micro USB interface power supply
· Consumption current: < 2 A
· Measurable frequency range: 0Hz-----250 kHz
· Amplitude adjustment range(/DIV):
2 mV; 5mV; 10mV; 20mV; 25mV; 40mV; 50mV; 80mV;
0.1V; 0.2V; 0.5V; 1V; 2V; 5V; 10V
· Input impedance: 1 MΩ/20pF
· Maximum measurement voltage: ±80 V,
· Time domain range: 10 uS/DIV-----10800 S/DIV
· Data recording and storage depth: 8388608 * 5
· Maximum