Master Control Fire Alarm MCFA Notifier 2404E 4 Zone Konvensional

The Notifier SFP-2404 and SFP-2404E Fire Alarm Control Panels (FACPs) bring the latest in microprocessor technology to conventional fire controls. The SFP-2404 is compatible with the i³ smoke detectors from System Sensor, with drift compensation, maintenance alert, and freeze warning. Automatic synchronization of audio/visual devices with three selections for manufacturer protocol. The Notification Appliance Circuit (NAC) protocol can silence audible devices while strobes continue to flash, using a single pair of wires. The SFP-2404 is compatible with conventional input devices such as two- and four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally-open contact devices. Refer to the Notifier Device Compatibility Document 15378 for a complete list of compatible devices. Note: Unless indicated otherwise, the term “SFP-2404” refers to both SFP-2404 and SFP-2404E models. Features • Four Style B (Class B) Initiating Device Circuits (IDCs). • Two Style Y (Class B) NACs. • Optional module that converts all four IDCs and two NACs to Class A operation. • 24 VDC. • i³ Technology features: – Drift compensation automatically adjusts detector sensitivity and increases resistance to false alarms caused by dust accumulation. – Maintenance Alert LEDs (per zone) warn of excessive dirt accumulation, preventing false alarms (meets NFPA 72 requirements).