5.0/ 5.0
100% pembeli merasa puas
7 rating • 4 ulasan
5(7)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 41
Subtotal
Rp53.000
Wemos D1 R32 ESP32 WiFi BLE Bluetooth for Arduino IDE
Rp53.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Modul IOT
Wemos D1 R32
Wemos D1 R32 adalah Papan WiFi/Bluetooth Berbasis ESP32 dalam bentuk Arduino UNO. Bentuk Arduino UNO memungkinkan Anda menggunakan Perisai Arduino yang ada dengan CPU Nirkabel ESP32. Semua pin I/O adalah 3.3V Chip ESP32 mengintegrasikan prosesor dual-core dengan 448 KByte ROM, 520 KByte SRAM, 16 KByte SRAM di RTC, 802.11 b/g/n/e/I Wi-Fi, Bluetooth v4.2 BR/EDR & BLE, jam & Kali, Antarmuka periferal yang melimpah dan mekanisme keamanan.
Spesifikasi :
WiFi
-802.11 b/g/n/e/i
-802.11 n (2.4 GHz), up to 150 Mbps
-802.11 e: QoS for wireless multimedia technology.
-WMM-PS, UAPSD
-MPDU and A-MSDU aggregation
-Block ACK
-Fragmentation and Defragmentation
-Automatic Beacon monitoring/scanning
-802.11 i security features: pre-authentication and TSN
-Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
-Infrastructure BSS Station mode/SoftAP mode
-Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
-UMA compliant and certified
-Antenna diversity and selection
Bluetooth
-Compliant with Bluetooth v4.2 BR/EDR and BLE specification
-Class-1, class-2 and class-3 transmitter without external power amplifier
-Enhanced power control
-+10 dBm transmitting power
-NZIF receiver with -98 dBm sensitivity
-Adaptive Frequency Hopping (AFH)
-Standard HCI based on SDIO/SPI/UART ? High speed UART HCI, up to 4 Mbps
-BT 4.2 controller and host stack
-Service Discover Protocol (SDP)
-General Access Profile (GAP)
-Security Manage Protocol (SMP)
-Bluetooth Low Energy (BLE)
-ATT/GATT
-HID
-All GATT-based profile supported
-SPP-Like GATT-based profile
-BLE Beacon
-A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
-CVSD and SBC for audio codec
-Bluetooth Piconet and Scatternet
Wemos D1 R32 adalah Papan WiFi/Bluetooth Berbasis ESP32 dalam bentuk Arduino UNO. Bentuk Arduino UNO memungkinkan Anda menggunakan Perisai Arduino yang ada dengan CPU Nirkabel ESP32. Semua pin I/O adalah 3.3V Chip ESP32 mengintegrasikan prosesor dual-core dengan 448 KByte ROM, 520 KByte SRAM, 16 KByte SRAM di RTC, 802.11 b/g/n/e/I Wi-Fi, Bluetooth v4.2 BR/EDR & BLE, jam & Kali, Antarmuka periferal yang melimpah dan mekanisme keamanan.
Spesifikasi :
WiFi
-802.11 b/g/n/e/i
-802.11 n (2.4 GHz), up to 150 Mbps
-802.11 e: QoS for wireless multimedia technology.
-WMM-PS, UAPSD
-MPDU and A-MSDU aggregation
-Block ACK
-Fragmentation and Defragmentation
-Automatic Beacon monitoring/scanning
-802.11 i security features: pre-authentication and TSN
-Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
-Infrastructure BSS Station mode/SoftAP mode
-Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
-UMA compliant and certified
-Antenna diversity and selection
Bluetooth
-Compliant with Bluetooth v4.2 BR/EDR and BLE specification
-Class-1, class-2 and class-3 transmitter without external power amplifier
-Enhanced power control
-+10 dBm transmitting power
-NZIF receiver with -98 dBm sensitivity
-Adaptive Frequency Hopping (AFH)
-Standard HCI based on SDIO/SPI/UART ? High speed UART HCI, up to 4 Mbps
-BT 4.2 controller and host stack
-Service Discover Protocol (SDP)
-General Access Profile (GAP)
-Security Manage Protocol (SMP)
-Bluetooth Low Energy (BLE)
-ATT/GATT
-HID
-All GATT-based profile supported
-SPP-Like GATT-based profile
-BLE Beacon
-A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
-CVSD and SBC for audio codec
-Bluetooth Piconet and Scatternet
Ada masalah dengan produk ini?