5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 68
Subtotal
Rp8.000
Piezo Analog Piezoelectric Ceramic Vibration Sensor getar kramik
Rp8.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Module
Description:
Based on piezoelectric ceramic chip analog vibration makes use of the anti-transformation process of piezoelectric ceramic making the electric signals vibrate.
When the piezoelectric ceramic shocking will generate an electrical signal, Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.
Parameter Teknis:
Tegangan Kerja: 3.3V atau 5V
Bekerja Saat Ini: Rentang Suhu Operasi: －10℃～＋70℃
Tipe Antarmuka: Output Sinyal Analog
Ukuran Barang: 30mm x 23mm
Diameter keramic = 27mm
GPIO:
S; signal output,
+; power supply (VCC),
-; ground (GND)
Input: Positive electrode of the piezoelectric ceramic
Gnd: Negative electrode of the piezoelectric ceramic
Features:
1. S-port is connected with the controller's analog input pin.
2. 5V and GND are respectively connected the power supply of + 5V and GND.
3. Input and Gnd are already connected with the piezoelectric ceramics' positive and negative.
★Paket yg didapat★
1 pcs ★Piezo Analog Piezoelectric Ceramic Vibration Sensor getar kramik★
Based on piezoelectric ceramic chip analog vibration makes use of the anti-transformation process of piezoelectric ceramic making the electric signals vibrate.
When the piezoelectric ceramic shocking will generate an electrical signal, Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.
Parameter Teknis:
Tegangan Kerja: 3.3V atau 5V
Bekerja Saat Ini: Rentang Suhu Operasi: －10℃～＋70℃
Tipe Antarmuka: Output Sinyal Analog
Ukuran Barang: 30mm x 23mm
Diameter keramic = 27mm
GPIO:
S; signal output,
+; power supply (VCC),
-; ground (GND)
Input: Positive electrode of the piezoelectric ceramic
Gnd: Negative electrode of the piezoelectric ceramic
Features:
1. S-port is connected with the controller's analog input pin.
2. 5V and GND are respectively connected the power supply of + 5V and GND.
3. Input and Gnd are already connected with the piezoelectric ceramics' positive and negative.
★Paket yg didapat★
1 pcs ★Piezo Analog Piezoelectric Ceramic Vibration Sensor getar kramik★
Ada masalah dengan produk ini?