5.0/ 5.0
100% pembeli merasa puas
10 rating • 2 ulasan
5(10)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 24
Min. pembelian 2 pcs
Subtotal
Rp306.000
PZEM-022 ENERGY WATT METER SENSOR CURRENT VOLTAGE PZEM022 ARUS TEG
Rp153.000
- Kondisi: Baru
- Min. Pemesanan: 2 Buah
- Etalase: Semua Etalase
specification:
PZEM-022
Optional transformer 100A open CT
1. Working voltage: 80~260VAC
2. Energy consumption:
3. Voltage:range 80~260V
4. Current 0~100A, starting current 0.02A
5. Frequency Test range 45~65Hz
6. Power factor: Test range 0~1PF
Product function:
1. Backlight control:
The backlight can be turned on or off by short pressing the button, and the backlight status will be saved automatically after power failure.
2. Power reset:
Step 1: Press and hold the key for 5 seconds until the power digit flashes, and then release the key;
Step 2: If you press the key again, the power data will be reset and the reset flashing state will exit; Step 3: If there is no key action within 5 seconds, it means that the power data is not reset and the reset status is exited.
3. Power alarm value setting:
Step 1: Press and hold the key for 3 seconds until the screen displays "SET CLr", then release the key to enter the power alarm value setting state;
Step 2: The current power alarm value is displayed in the power area and the lowest digit starts to flash. At this time, the digit can be+1 by pressing the key briefly. When there is no key operation for more than 3 seconds, the digit will be automatically switched. The setting method is the same as above;
Step 3: After setting, press and hold the key for more than 5 seconds to automatically save and exit. The range of active power threshold setting is 0.0~22kW
PZEM-022
Optional transformer 100A open CT
1. Working voltage: 80~260VAC
2. Energy consumption:
3. Voltage:range 80~260V
4. Current 0~100A, starting current 0.02A
5. Frequency Test range 45~65Hz
6. Power factor: Test range 0~1PF
Product function:
1. Backlight control:
The backlight can be turned on or off by short pressing the button, and the backlight status will be saved automatically after power failure.
2. Power reset:
Step 1: Press and hold the key for 5 seconds until the power digit flashes, and then release the key;
Step 2: If you press the key again, the power data will be reset and the reset flashing state will exit; Step 3: If there is no key action within 5 seconds, it means that the power data is not reset and the reset status is exited.
3. Power alarm value setting:
Step 1: Press and hold the key for 3 seconds until the screen displays "SET CLr", then release the key to enter the power alarm value setting state;
Step 2: The current power alarm value is displayed in the power area and the lowest digit starts to flash. At this time, the digit can be+1 by pressing the key briefly. When there is no key operation for more than 3 seconds, the digit will be automatically switched. The setting method is the same as above;
Step 3: After setting, press and hold the key for more than 5 seconds to automatically save and exit. The range of active power threshold setting is 0.0~22kW
Ada masalah dengan produk ini?