5.0/ 5.0
100% pembeli merasa puas
34 rating • 15 ulasan
5(34)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: 131
Subtotal
Rp122.000
Surge Protection Device Arrester SPD DC 2P 600V 1000V - 600VDC
Rp122.000
Pilih max cont operating voltage: 600VDC
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Panel Accessories
YTTS1-PV Series DC SPD
Surge Protection Device/ SPD Class II digunakan untuk meredam serangan petir tidak langsung (karena induksi). Dipasang diantara potensi sumber serangan petir dengan produk yang akan dilindungi. Wajib dihubungkan ke pentanahan sesuai PUIL <5 Ohm dan menggunakan konduktor >4mm2.
Spesifikasi detail mohon lihat pada foto.
Produk ini tersertifikasi IEC (International Electrotechnical Commission), dokumen dapat diberikan ketika diminta setelah pembelian. Menggunakan produk yang tidak sesuai standard dapat berakibat fatal!
Application
Surge protective device, protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the dc networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the dc power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long. High energy MOVs equipped with specific thermal disconnectors and related failure
indicators.
Features
1. Type 2 surge protective device for Photovoltaic.
2. Modular design, convenient installation, could be replaced.
3. Time of response <25ns.
4. The color of visible window shows operating status, green means normal, red means replace
5. No leakage, no operating currents.
Surge Protection Device/ SPD Class II digunakan untuk meredam serangan petir tidak langsung (karena induksi). Dipasang diantara potensi sumber serangan petir dengan produk yang akan dilindungi. Wajib dihubungkan ke pentanahan sesuai PUIL <5 Ohm dan menggunakan konduktor >4mm2.
Spesifikasi detail mohon lihat pada foto.
Produk ini tersertifikasi IEC (International Electrotechnical Commission), dokumen dapat diberikan ketika diminta setelah pembelian. Menggunakan produk yang tidak sesuai standard dapat berakibat fatal!
Application
Surge protective device, protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the dc networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the dc power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long. High energy MOVs equipped with specific thermal disconnectors and related failure
indicators.
Features
1. Type 2 surge protective device for Photovoltaic.
2. Modular design, convenient installation, could be replaced.
3. Time of response <25ns.
4. The color of visible window shows operating status, green means normal, red means replace
5. No leakage, no operating currents.
Ada masalah dengan produk ini?