Amplifier LNA 0.05-4g Amplifier Low Noise VHF UHF Ham uwmj

Description:100% Brand New High class quality This is a ultra low noise, high linearity low noise amplifier module. It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB. Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM. You can cascade several LNA modules in order to improve gain. Generally used for high frequency or intermediate frequency preamplifier of radio receiver, and high sensitivity amplifying circuit of electronic detection equipment, as well as transceiver wireless communication card, tower mounted amplifier TMA, combiner, repeaters, and distal/digital wireless broadband head equipment, etc. Specification： Voltage: 5V Current: 90mA Gain: 18dB@0.9G Input/Output Impedance: 50Ω Max. Output Power: P1db 22dBm@2GHz Input Signal: 10dBm, output is distorted Bandwidth 0.05-4GHZdiffers at different frequency, refers to S21 curve Noise Factor: 0.6dB@0.9GHzSpecifications:This is a ultra low noise, high linearity low noise amplifier module. It has 0.6dB typical noise factor, 19dB typical gain, 23dB P1dB. Can be used for high dynamic range receiver LNA application, and amplify small signal of 110dBM. You can cascade several LNA modules in order to improve gain. Bandwidth 0.05-4GHZdiffers at different frequency, refers to S21 curvePackage Included:1 x LNANotes:Due to the difference between different monitors, the pictures may not reflect the actual color of the item. Compare the detail sizes with yours, please allow 1-3cm error, due to manual measurement. Please leaving a message before you give the bad feedback, if the products have some problems. Thanks for your understandings