Yokogawa YPP6200-7R3 | Analog Input Flowrate/Totalizer
Rp9.300.000
Yokogawa PROPLUS YPP6200 / YPP6300 Flow Rate/Totalizer Yokogawa PROPLUS YPP6200 and YPP6300 PROPLUS meters are 1/8 DIN flow rate/totalizers specifically designed for displaying flow rate and total from flowmeters with analog or pulse outputs. These flow rate/totalizers are particularly well-suited for flow applications because they can display flow rate and flow total at the same time, provide power to drive the flowmeter, and display flow total, flow grand total, or non-resettable flow total on up to nine digits. The YPP6200 can display flow rate and total by extracting the square root from the 4-20 mA signal from a differential pressure transmitter. The user selectable low-flow cutoff feature gives a reading of zero when the flow rate drops below a user selectable value. YPP6200 features: Display Flow Rate User Selectable Low-Flow Cutoff Only 2 Calibration Points Required The YPP6300 accepts the pulse output from a flowmeter and with the appropriate option installed can convert the pulse to a 4-20 mA signal. The 4-20 mA signal can be programmed to correspond to either the flow rate or the total flow. YPP6300 features: Use K-Factor or Multi-Point Scaling PROPLUS Powers the Flowmeter Display Flow Rate & Total Rate/totalizer features: Display rate/total at the same time Total, grand total or non-resettable grand total Password protection for total reset 9-Digit totalizer with total overflow feature Total stored in non-volatile memory Any relay for rate or total 4-20 mA output for rate or total Sampling relay Meter features: NEMA 4X, IP65 front Large dual-line 6-digit display Dual-scale for level applications Multi-Pump Alternation Control Signal Input Conditioning