1.5/ 5.0
0% pembeli merasa puas
2 rating • 2 ulasan
5(0)0%
4(0)0%
3(0)0%
2(1)50%
1(1)50%
Atur jumlah dan catatan
Stok Total: 99998
Subtotal
Rp800.000
42 Stepper Motor NEMA 17 1.5A Torque 0.55Nm TB6560 Drive CNC KIT AH77
Rp800.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: CNC KIT
42 Stepper Motor NEMA 17 1.5A Torque 0.55Nm TB6560 Drive CNC KIT AH77
Microstepper driver
Motor type:42 Stepper Motor
Voltage:12V-24V
Current: 1.5A
Output torque: 0.55Nm (Nm)
Body length: 48mm
Shaft length: 21mm
The Shaft diameter:5mm
Shaft: single shaft
Outlet: two-phase four lead (blackColor A +Green A- Red B +Blue B-)
Shaft mode:Shaft 5 mm + single flat wire
TB6560 Drive:
- Working voltage: DC 10~35V, recommended using switch DC 24V power supply;
- Uses 6N137 high speed optocoupler, ensuring high speed never lost steps;
- Uses Toshiba TB6560AHQ brand new genuine chip, with low-voltage shutdown, over-temperature and over-current protection circuit parking, to ensure optimum performance;
- Rated maximum output is about 3A, peak value is 3.5A;
- Suitable 42, 57 3A stepper within two / four phase, four wire / six wire stepper motor, not suitable for more than 3A stepper motor;
- Automatic half current function; Segments: full step, half step, 1/8 step, 1/16 step, up to 16 segments
Microstepper driver
Motor type:42 Stepper Motor
Voltage:12V-24V
Current: 1.5A
Output torque: 0.55Nm (Nm)
Body length: 48mm
Shaft length: 21mm
The Shaft diameter:5mm
Shaft: single shaft
Outlet: two-phase four lead (blackColor A +Green A- Red B +Blue B-)
Shaft mode:Shaft 5 mm + single flat wire
TB6560 Drive:
- Working voltage: DC 10~35V, recommended using switch DC 24V power supply;
- Uses 6N137 high speed optocoupler, ensuring high speed never lost steps;
- Uses Toshiba TB6560AHQ brand new genuine chip, with low-voltage shutdown, over-temperature and over-current protection circuit parking, to ensure optimum performance;
- Rated maximum output is about 3A, peak value is 3.5A;
- Suitable 42, 57 3A stepper within two / four phase, four wire / six wire stepper motor, not suitable for more than 3A stepper motor;
- Automatic half current function; Segments: full step, half step, 1/8 step, 1/16 step, up to 16 segments
Ada masalah dengan produk ini?