4.8/ 5.0
100% pembeli merasa puas
19 rating • 6 ulasan
5(15)78.95%
4(4)21.05%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 99934
Subtotal
Rp870.000
Kit 57 stepper motor 1.8 N.m 76mm + Driver DM542 4.2A KB28
Rp870.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: CNC KIT
Kit 57 stepper motor 1.8 N.m 76mm + Driver DM542 4.2A KB28
57 stepper motor 1.8 N.m 76mm
Current: 2.8A
Output torque: 1.8Nm
Body length: 76mm
Out shaft length: 21mm
Out shaft shaft diameter: 6.35mm
Out shaft mode: single axis
Outlet way: two-phase four leads (Black A + Green A- Red B + Blue B- )
Driver DM542 4.2A
DM542 digital stepper drive.
Anti-Resonance, provides optimum torque and nulls mid-range instability.
Input voltage 18-50VDC.
Output current programmable, from 1A to 4.2A.
Pulse input frequency up to 200 KHz.
Suitable for 2-phase and 4-phase motors.
Automatic idle-current reduction.
Over-voltage, over-current protection.
TTL compatible and optically isolated input.
Support PUL/DIR and CW/CCW modes.
Operating Temperature : 70 C.
Note:Cable link drivernya.
merah <---> A+
hijau<----> A-
kuning<--->B+
biru<---> B-
57 stepper motor 1.8 N.m 76mm
Current: 2.8A
Output torque: 1.8Nm
Body length: 76mm
Out shaft length: 21mm
Out shaft shaft diameter: 6.35mm
Out shaft mode: single axis
Outlet way: two-phase four leads (Black A + Green A- Red B + Blue B- )
Driver DM542 4.2A
DM542 digital stepper drive.
Anti-Resonance, provides optimum torque and nulls mid-range instability.
Input voltage 18-50VDC.
Output current programmable, from 1A to 4.2A.
Pulse input frequency up to 200 KHz.
Suitable for 2-phase and 4-phase motors.
Automatic idle-current reduction.
Over-voltage, over-current protection.
TTL compatible and optically isolated input.
Support PUL/DIR and CW/CCW modes.
Operating Temperature : 70 C.
Note:Cable link drivernya.
merah <---> A+
hijau<----> A-
kuning<--->B+
biru<---> B-
Ada masalah dengan produk ini?