5.0/ 5.0
100% pembeli merasa puas
2 rating • 0 ulasan
5(2)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Flat noozle
Atur jumlah dan catatan
Stok: 998
Subtotal
Rp850.000
Spray Gun/Alat Tembak Semprotan/Spotting Gun Silverstar/Cleaning Gun - Flat noozle
Rp850.000
Pilih type noozle: Flat noozle
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Textile Spot Cleaning Gun
Type: HD -180 SERIES is an affordable and durable spot cleaning gun. With its adjustable high pressure spray and the new integrated air drying system, you will not only have enough power to remove your toughest ink spots, but it will also dry them simultaneously. With its simple design and ease of use, the HD -180 spot cleaning gun makes a great addition to every screen printing shop.
Instructions
1)Remove the container, fill with fluid (about 2/3 full) and replace. Depress switch for 15-20 seconds to prime pump. Spray fluid onto scrap fabric to remove oil film from internal pump parts. Spray gun is now ready for use.
2) Adjustable Nozzle controls the pressure of the cleaning fluid. This is adjusted by simply rotating the nozzle collar on the front of the gun.
3) Volume Control Knob at the rear of gun controls the amount of fluid being dispensed. For cleaning, turn button as far left as possible: then back to right 1/2 to one revolution. Once adjustments are made to suit your needs, it is generally not necessary to change them.
Water tank capacitiy: 1.2 L
Volt:220v
Max Output pressure: 50 HZ
working pressure >0.8 Mpa
Cup vokume: 1200 ml
Power : 65 Watt
Nozzle Type: flat nozzle or adjustable nozzle
Coating Supply Method:nPressure Feed
Maximum Output Pressure: 50Hz
Spraying Amount Of Paint: 1-2 Ml/s
Working Pressure: ≥ 0.8 Mpa
Nozzle Diameter: 0.1mm
Type: HD -180 SERIES is an affordable and durable spot cleaning gun. With its adjustable high pressure spray and the new integrated air drying system, you will not only have enough power to remove your toughest ink spots, but it will also dry them simultaneously. With its simple design and ease of use, the HD -180 spot cleaning gun makes a great addition to every screen printing shop.
Instructions
1)Remove the container, fill with fluid (about 2/3 full) and replace. Depress switch for 15-20 seconds to prime pump. Spray fluid onto scrap fabric to remove oil film from internal pump parts. Spray gun is now ready for use.
2) Adjustable Nozzle controls the pressure of the cleaning fluid. This is adjusted by simply rotating the nozzle collar on the front of the gun.
3) Volume Control Knob at the rear of gun controls the amount of fluid being dispensed. For cleaning, turn button as far left as possible: then back to right 1/2 to one revolution. Once adjustments are made to suit your needs, it is generally not necessary to change them.
Water tank capacitiy: 1.2 L
Volt:220v
Max Output pressure: 50 HZ
working pressure >0.8 Mpa
Cup vokume: 1200 ml
Power : 65 Watt
Nozzle Type: flat nozzle or adjustable nozzle
Coating Supply Method:nPressure Feed
Maximum Output Pressure: 50Hz
Spraying Amount Of Paint: 1-2 Ml/s
Working Pressure: ≥ 0.8 Mpa
Nozzle Diameter: 0.1mm
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan