5.0/ 5.0
100% pembeli merasa puas
2 rating • 1 ulasan
5(2)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 98
Subtotal
Rp540.000
NeutronRC 4in1 AM32 50A Electronic Speed Controller ESC
Rp540.000
30x30mm installation design,
further reducing the size and weight.
Support 24K-96KHz PWM refresh rate,
The built-in fuel gauge allows the flight controller to monitor
the current in real time.
The installation hole is equipped with a shock-absorbing
mechanism, which effectively reduces the impact of external
vibration on the high-sensitivity components of the ESC.
And provide first-level shock absorption protection for the
upper flight control and other equipment.
Support the latest DShot ultra-high speed digital throttle.
Strong anti-interference ability,
Quick response. It also supports common PWM, Oneshot
And Multishot and Proshot and other throttle] signals.
Open Source AM32 firmware has powerful performance and
rich functions; and supports multiple ways to set ESC
parameters, or upgrade ESC firmware (such as through the
throttle) signal line, use other development boards,
Or use the betaflight firmware flight controller to set up
or upgrade the ESC
Continuous/peak current: 50A
Number of battery cells: 6S LiPo
BEC output: no
Power cord: #12AWG--100mm*1 Red
#12AWG--100mm*1 Black
Output line: none, reserved pad
Power plug: None, XT60 plug is included in the package
Output plug: no plug
Dimensions.: 40X40x7mm
Weight: 15g
Firmware program: NeutronRC_4in1_F421 AM32
NEUTRONRC2 ESCape32
Programming parameters: support
Programming method: AM32/ESCape32
Throttle travel calibration: support
Oneshot125 throttle mode: support
Oneshot42 throttle mode: support
MultiShot throttle mode: support
DShot150/300/600: Support
Current sensor Scale=200
further reducing the size and weight.
Support 24K-96KHz PWM refresh rate,
The built-in fuel gauge allows the flight controller to monitor
the current in real time.
The installation hole is equipped with a shock-absorbing
mechanism, which effectively reduces the impact of external
vibration on the high-sensitivity components of the ESC.
And provide first-level shock absorption protection for the
upper flight control and other equipment.
Support the latest DShot ultra-high speed digital throttle.
Strong anti-interference ability,
Quick response. It also supports common PWM, Oneshot
And Multishot and Proshot and other throttle] signals.
Open Source AM32 firmware has powerful performance and
rich functions; and supports multiple ways to set ESC
parameters, or upgrade ESC firmware (such as through the
throttle) signal line, use other development boards,
Or use the betaflight firmware flight controller to set up
or upgrade the ESC
Continuous/peak current: 50A
Number of battery cells: 6S LiPo
BEC output: no
Power cord: #12AWG--100mm*1 Red
#12AWG--100mm*1 Black
Output line: none, reserved pad
Power plug: None, XT60 plug is included in the package
Output plug: no plug
Dimensions.: 40X40x7mm
Weight: 15g
Firmware program: NeutronRC_4in1_F421 AM32
NEUTRONRC2 ESCape32
Programming parameters: support
Programming method: AM32/ESCape32
Throttle travel calibration: support
Oneshot125 throttle mode: support
Oneshot42 throttle mode: support
MultiShot throttle mode: support
DShot150/300/600: Support
Current sensor Scale=200
Ada masalah dengan produk ini?