Atur jumlah dan catatan
Stok: Sisa 4
Subtotal
Rp23.000.000
Fluke 805ES External Vibration Sensor for Fluke 805/805ES - Fluke 805es - Fluke 805es
Rp23.000.000
Pilih warna: Fluke 805es
OVERVIEW:
The Fluke 805ES is an external vibration sensor that is ideal in situations for which it is either difficult or impractical to use the onboard vibration sensor tip of the 805 Vibration Meter. The 805ES allows you to take measurements in crowded or hard-to-reach locations, behind machine guards or enclosures, or in out-of-reach places where it is difficult to apply sufficient manual pressure to the 805 Vibration Meter.
FEATURES:
◆ Low-profile 90-degree sensor body allows the sensor to get into tight spots
◆ Rugged, coiled cable minimizes dangling, while stretching to more than 7ft when needed
◆ Powerful "U" shaped magnet mount creates a firm connection to flat, or curved measurement surfaces
◆ Rugged, sealed cable connector with strain relief tail reduces cable wear
◆ Removable sensor magnet to allow for direct attachment to a sensor mounting pad, or threaded hole on a piece of equipment
◆ Connects directly to 805 Vibration Meter SMB connector located in the heel of the meter
SPECIFICATION:
◆ Measurement range: 7 g pk (68.7 m/s² pk)
◆ Frequency range: 0 to 6000 cpm (0 to 100 Hz)
◆ Relay: 3A Form C 480 VAC
◆ Relay (Contacts) (DPDT): Normally open / closed
◆ Temperature range (Operating): -13 to 140°F (-25 to 60°C)
◆ Enclosure rating: IP66
◆ Sensing element: Magnet
◆ Housing material: Aluminum alloy
◆ Electrical connector: Screw terminals
◆ Screw terminal wire size: 24-14 AWG (0.2 - 2.5 mm²)
◆ Cable input: 3/4-14 NPT
◆ Mounting hole size: 0.25 in (6.4 mm)
◆ Sensing geometry: Inertial element
Kalibrasi Yess
EACH UNIT INCLUDES WITH:
◆ Fluke 805ES
The Fluke 805ES is an external vibration sensor that is ideal in situations for which it is either difficult or impractical to use the onboard vibration sensor tip of the 805 Vibration Meter. The 805ES allows you to take measurements in crowded or hard-to-reach locations, behind machine guards or enclosures, or in out-of-reach places where it is difficult to apply sufficient manual pressure to the 805 Vibration Meter.
FEATURES:
◆ Low-profile 90-degree sensor body allows the sensor to get into tight spots
◆ Rugged, coiled cable minimizes dangling, while stretching to more than 7ft when needed
◆ Powerful "U" shaped magnet mount creates a firm connection to flat, or curved measurement surfaces
◆ Rugged, sealed cable connector with strain relief tail reduces cable wear
◆ Removable sensor magnet to allow for direct attachment to a sensor mounting pad, or threaded hole on a piece of equipment
◆ Connects directly to 805 Vibration Meter SMB connector located in the heel of the meter
SPECIFICATION:
◆ Measurement range: 7 g pk (68.7 m/s² pk)
◆ Frequency range: 0 to 6000 cpm (0 to 100 Hz)
◆ Relay: 3A Form C 480 VAC
◆ Relay (Contacts) (DPDT): Normally open / closed
◆ Temperature range (Operating): -13 to 140°F (-25 to 60°C)
◆ Enclosure rating: IP66
◆ Sensing element: Magnet
◆ Housing material: Aluminum alloy
◆ Electrical connector: Screw terminals
◆ Screw terminal wire size: 24-14 AWG (0.2 - 2.5 mm²)
◆ Cable input: 3/4-14 NPT
◆ Mounting hole size: 0.25 in (6.4 mm)
◆ Sensing geometry: Inertial element
Kalibrasi Yess
EACH UNIT INCLUDES WITH:
◆ Fluke 805ES
Ada masalah dengan produk ini?
ULASAN PEMBELI

Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan