5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 19
Subtotal
Rp815.000
NOYAFA NF 8209S Network LAN Cable Tester Wire Tracker POE SCAN LENGHT
Rp815.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: NETWORK
NF-8209S Network cable tester adopts digital signal receiving and decoding technology, which has a higher degree of anti-interference and is more accurate, and eliminates false alarms. At the same time, it has functions such as regular line hunting, anti-interference hunting, line alignment, length test, POE test, port flashing, crimping test, NCV induction pen and other functions, which can meet user needs to a greater extent and improve work efficiency.
Product Description:
Brand: NOYAFA
Product name: Network cable tester
Type: NF-8209S
Size: 125x70x32mm, 198x50x30mm
Display: 2.8 inch LCD screen
Applicable network cables: CAT5, CAT6
Length measuring range: 2.5-600m
Battery type: 3.7V/1400mAh Lithium battery
Low voltage request: Yes
Low battery reminder: Yes
Voltage test range: DC5 ~ 60V (POE Test)
The main function:
1. Line-to-line test: Test short circuit, open circuit, crossover, normal, etc. of network cable.
2. Length test: Network cable length breakpoint test, no calibration required. ( Note: The network cable cannot be turned on during length measurement, and cannot be connected to equipment and instruments. The length must be between 2.5 meters and 200 meters, otherwise the measurement data will be inaccurate)
3. Hunting line mode: Normal mode/Anti-jamming mode.
(1) The closer the receiving probe is to the target line, the stronger the signal and the louder the sound. The adjuster on the receiver is used to adjust the sensitivity when hunting lines.
(2) Note: the receiver hunting mode must be consistent with the transmitter hunting mode, (short press the receiver function button to switch), otherwise the signal will not be received)
4. POE test: Power supply cable core and power supply voltage detection, standard and non-standard PoE can be tested.
5. Port flashing/link test function: Quickly find the network cable on the switch/router. (Link test: Link Test is performed automatically when the port flashes, and the screen wi
Product Description:
Brand: NOYAFA
Product name: Network cable tester
Type: NF-8209S
Size: 125x70x32mm, 198x50x30mm
Display: 2.8 inch LCD screen
Applicable network cables: CAT5, CAT6
Length measuring range: 2.5-600m
Battery type: 3.7V/1400mAh Lithium battery
Low voltage request: Yes
Low battery reminder: Yes
Voltage test range: DC5 ~ 60V (POE Test)
The main function:
1. Line-to-line test: Test short circuit, open circuit, crossover, normal, etc. of network cable.
2. Length test: Network cable length breakpoint test, no calibration required. ( Note: The network cable cannot be turned on during length measurement, and cannot be connected to equipment and instruments. The length must be between 2.5 meters and 200 meters, otherwise the measurement data will be inaccurate)
3. Hunting line mode: Normal mode/Anti-jamming mode.
(1) The closer the receiving probe is to the target line, the stronger the signal and the louder the sound. The adjuster on the receiver is used to adjust the sensitivity when hunting lines.
(2) Note: the receiver hunting mode must be consistent with the transmitter hunting mode, (short press the receiver function button to switch), otherwise the signal will not be received)
4. POE test: Power supply cable core and power supply voltage detection, standard and non-standard PoE can be tested.
5. Port flashing/link test function: Quickly find the network cable on the switch/router. (Link test: Link Test is performed automatically when the port flashes, and the screen wi
Ada masalah dengan produk ini?