High Temperature Data Logger With Flexible Probe

SPECIFICATIONS OM-CP-HITEMP140-FP (Data Logger Without Thermal Shield) TEMPERATURE Temperature Sensor: Flexible 100 Ω platinum RTD Probe Measurement Range: -60 to 260°C (-76 to 500°F) Temperature Resolution: 0.01°C (0.02°F) Calibrated Accuracy: ±0.1°C (±0.18°F) GENERAL Data Logger Response Time (Hours: Minutes: Seconds: Fractions of a Second): In Air: t60 - 00:00:30:00 (30 sec to reach 60% of step change) t90 - 00:00:70:00 (70 sec to reach 90% of step change) In Water: t60 - 00:00:03:50 (3.5 sec to reach 60% of step change) t90 - 00:00:06:50 (6.5 sec to reach 90% of step change) Reading Rate: 4 readings per second up to 1 reading every 24 hours Memory: 32,767 readings Start Modes: • Software programmable immediate start • Delay start up to 18 months in advance Stop Modes: Manual or Timed (specific date and time) Trigger Settings: High and low limits may be set. Once data meets or exceed sets limits, the device will record to memory. Bi-level start and stop triggers can also be programmed. Users can specify the number of readings to take after the device triggers. Readings in Trigger Settings Mode: 10,922 readings Real Time Recording: May be used with PC to monitor and record data in real time Password Protection: An optional password may be programmed into the device to restrict access to configuration options. Data may be read without the password. Memory Wrap Around: Yes Battery Type: 3.6V high-temperature lithium battery included; user replaceable Battery Life: 1 year typical [1 minute reading rate at 25°C (77°F)] Calibration: Digital calibration through software Calibration Date: Automatically recorded within device Data Format: Date and time stamped °C, °F, °R, K Time Accuracy: ±1 minute/month at 25°C (77°F) Extended Operation: ±20 minutes/month at 140°C (284°F) Computer Interface: OM-CP-IFC400 USB docking station or OM-CP-IFC406 multiplexer interface