AT-3000H handheld ultrasonic flow meter TM-1 TS-2 DN15-700mm RS485

The ultrasonic flowmeter uses the time difference principle of ultrasonic wave propagation in the medium to measure the flow rate.It is mainly used to measure liquid, such as ultra-pure liquid, chemical, raw sewage, reclaimed water, cooling water, river water, plant sewage, etc.

The ultrasonic flowmeter is composed by transmitter and sensors

Main technical parameters

Measurement range: 0~±10m/s 

Accuracy: flow rate is better than ±1% 

Display: 2 x 10 Chinese backlit characters or 2 x 20 character LCD display, support 

Three languages: Chinese, English and Italian 

Flow direction: Positive and negative two-way metering, and measure positive, negative, net cumulative flow / heat
Data interface: RS485 serial turbulence, can be upgraded by PC computer, support MODBUS and other protocols 

Data recording: positive/negative/net accumulations at 512 days, 128 months and 10 days before automatic memory More than 30 times, power off time and flow rate before automatic memory and can be automatically or manually added 

 2-way three-wire PT100 platinum resistor for thermal measurement

Measuring medium: water, sea water, sewage, alcohol, various oils, etc., single, uniform, stable liquid that can guide ultrasonic waves
Media turbidity: ≤ 2000pm and small bubble content
Applicable pipe: Carbon steel, stainless steel, copper, PVc, aluminum, fiberglass and other uniform and dense pipes, allowing lining 

Straight pipe section: The sensor installation point is best to meet: upstream 10, downstream 5, from the pump outlet 300 (D is the diameter)

Pipe diameter size range : DN15-700mm