New Product Speedybee F405 V4 Bls 55A 30X30 Fc Esc Stack

Specifications
Product Name: SpeedyBee F405 V4 30x30 Flight Controller
MCU: STM32F405
IMU (Gyro): ICM42688P
USB Port: Type-C
Barometer: Built-in
OSD Chip: AT7456E chip
BLE Bluetooth: Supported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART4)
WIFI: Not supported
DJI Air Unit Plug: Supported
Blackbox MicroSD Card Slot: Supported
Current Sensor Input: Supported. For SpeedyBee BLS 55A ESC, please set scale = 400 and Offset = 0.
Power Input: 3S - 6S Lipo
5V Output: 9 groups of 5V output. The total current load is 3A.
9V Output: 2 groups of 9V output. The total current load is 3A.
4.5V Output: Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load
UART: 6 sets (UART1, UART2, UART3, UART4(Dedicated for Bluetooth connection)), UART5(Dedicated for ESC telemetry), UART6
I2C: Supported. SDA & SCL pads on front side. Used for magnetometer, sonar, etc.
Supported FC Firmware: BetaFlight (Default), INAV
Firmware Target: SPEEDYBEEF405V4
Mounting: 30.5 x 30.5mm (4mm hole diameter)
Dimension: 41.6(L) x 39.4(W) x 7.8(H)mm
Weight: 10.5g

Product Name: SpeedyBee BLS 55A 30x30 4-in-1 ESC
Firmware: BLHeli_S J-H-40
Continuous Current: 55A * 4
Burst Current: 70A (10 seconds)
TVS Protective diode: Yes
ESC Protocol: DSHOT300/600
Power Input: 3-6S LiPo
Power Output: VBAT
Current Sensor: Support (Scale=400 Offset=0)
ESC Telemetry: Not supported
Mounting: 30.5 x 30.5mm (4mm hole diameter)
Dimension: 45.6(L) * 44(W) *8mm(H)
Weight: 23.5g .
.
.Selamat Berbelanja, Semoga Bermanfaat dan Berkah