Enerpac Hydraulic Cylinder 50 Ton (Double Acting)Saddle CLRG508.pt

Description - Integral stop ring provides piston blow-out protection - Double-acting for positive retraction - Baked enamel outside finish and plated pistons provide superior corrosion resistance - Safety valve in retract side of cylinder helps to prevent damage in case of accidental over-pressurization - Interchangeable, hardened grooved saddles are standard - Plunger wiper reduces contamination, extending cylinder life Saddles All CLRG-Series cylinders are equipped with bolt-on removable grooved saddles. For information on optional tilt saddles, see selection chart. Gauges A pilot-operated check valve ŒŠ(V-42)� can be inserted between cylinder ports. This valve provides a safety lock on the cylinder under load at any position and remote control for unlocking. Optimum Performance Enerpac’s range of Z-Class electric pumps, fitted with manual or solenoid operated 3-way valves, offer optimum combinations with CLGR cylinders Low Height-High Tonnage When low height with high force is required, CLPSeries Pancake Cylinders with lock nut offer the solution to lift the first few inches. specificationss : Model Number CLRG508 Unit 1pc Max. Cylinder Capacity (t) 50 Stroke (inch) 7.87 Cylinder Effective Area Push (inch) 11.81 Cylinder Effective Area Pull (inch) 5.85 Oil Capacity Push (inch) 93.00 Oil Capacity Pull (inch) 46.03 Collapsed Height (inch) 12.28 Maximum Operating Pressure (psi) 10000 Extended Height B (inch) 20.16 Outside Diameter D (inch) 5.12 Cylinder Bore Diameter E (inch) 3.88 Plug Diameter F (mm) 2.76 Base to Advance Port H (inch) 1.65 Standard Saddle Diameter J (inch) 1.97 Saddle Protrusion from Plunger K (inch) 0.04 Depth of Plunger Hole L (inch) 0.75 Berat (Kg) 29.9