Atur jumlah dan catatan
Stok Total: 145
Subtotal
Rp472.000
400Pcs Tile Leveling System For Tile Laying Reusable Steel Needles Flooring Replaceable Pin Tiling Construction Tools
Rp472.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Origin : Mainland China
DIY Supplies : Plumbing
Hign-concerned Chemical : None
Feedback
1.As your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and remember give us five stars, as our reward!
2.If you don't satisfied the items, please contact us before leaving negative feedback, we can give you best solution,We will service to you satisfaction
Wear-resistant, recyclable. Easy to use in DIY operation.
Balance tiles in the same horizontal position. Improve the installation speed of tile.
Reduce the fatigue/pressure of installers.
There is hardly any crackless, flat surface.
It reduces the need for grinding and polishing. Prevent tiles from moving during solidification.
skills:
Lay the first tile, leaving a thickness of more than 2mm (with cross washers). Close to the tiles.
Insert the T-pin along the space between the tiles.
Then rotate it 180 degrees and fix the T-shaped pin on the bottom of the two tiles.
Use a hand/special wrench until both tiles are on the same level.
About 5-6 hours after leveling, before the cement/adhesive is completely dry, rotate the cover in the reverse direction and take out the 180 degree T needle until
Name: Steel Needle for Ceramic Tile Leveling System
Type: 400 steel needles
Colour: silver
Material: stainless steel metal
Size: 1.3mm thick, 32mm long
Package Contents:
400 x steel needle
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
DIY Supplies : Plumbing
Hign-concerned Chemical : None
Feedback
1.As your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and remember give us five stars, as our reward!
2.If you don't satisfied the items, please contact us before leaving negative feedback, we can give you best solution,We will service to you satisfaction
Wear-resistant, recyclable. Easy to use in DIY operation.
Balance tiles in the same horizontal position. Improve the installation speed of tile.
Reduce the fatigue/pressure of installers.
There is hardly any crackless, flat surface.
It reduces the need for grinding and polishing. Prevent tiles from moving during solidification.
skills:
Lay the first tile, leaving a thickness of more than 2mm (with cross washers). Close to the tiles.
Insert the T-pin along the space between the tiles.
Then rotate it 180 degrees and fix the T-shaped pin on the bottom of the two tiles.
Use a hand/special wrench until both tiles are on the same level.
About 5-6 hours after leveling, before the cement/adhesive is completely dry, rotate the cover in the reverse direction and take out the 180 degree T needle until
Name: Steel Needle for Ceramic Tile Leveling System
Type: 400 steel needles
Colour: silver
Material: stainless steel metal
Size: 1.3mm thick, 32mm long
Package Contents:
400 x steel needle
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan