Atur jumlah dan catatan
Stok Total: Sisa 8
Subtotal
Rp95.000
ARDUINO UNO R3 CH340G ROBOTDYN UNO R3 CH340G ORIGINAL tools
Rp95.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: TOOLS N PARTS
promo Uno R3 - compatible with Arduino Uno R3 board. Built on the Atmel ATmega328 microcontroller and USB-UART interface chip
for functionality similar to the Arduino Uno (ATmega 168/328). It is a budget, but the same stable, and uses the original chips Atmel ATmega (16 MHz).
The board used the chip CH340G as converter UART-USB. Chip CH340G - is a budget solution. When you work in the frequency 12Mhz, giving a stable result of data exchange (need install drivers to computer).
Uno R3 - connects to the computer via micro USB cable (used for almost all Android smartphones).You can supply power to board through the Micro USB connector or DC-jack. The voltage regulator (LDO) can deal with incoming voltage from 6V to 12V DC. Output current for 5V - about 800mA, for 3.3V - about 180mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects. We recomiende supply 7-9V.SPESIFIKASI :
Microcontroller : ATMega328
USB-TTL converter : CH340G
Power Out : 5V-800mA
Power IN. USB : 3.3V (180mA max.)
Power IN. VIN/DC Jack : 7-9V
Power Consumption : 5V 800mA
Logic Level : 5V
USB : Micro USB
Clock Frequency : 16MHz
Operating Supply Voltage : 5V
Digital I/O : 14(6-PWM)
Analog I/O : 8
Memory Size : 16Kb/32 Kb
Data RAM Type/Size : 2Kb
Data ROM Type/Size : 1Kb
Interface Type : ISP
Operating temperature : 40/+85
LengthWidth : 53.3468.58mm
KELENGKAPAN :
1pcs ROBOTDYN UNO R3 CH340G
Komponen pendukung atau alternatif yang mungkin antum butuhkan :
UNO R3 SMD CLONE WITHOUT CABLElink -
for functionality similar to the Arduino Uno (ATmega 168/328). It is a budget, but the same stable, and uses the original chips Atmel ATmega (16 MHz).
The board used the chip CH340G as converter UART-USB. Chip CH340G - is a budget solution. When you work in the frequency 12Mhz, giving a stable result of data exchange (need install drivers to computer).
Uno R3 - connects to the computer via micro USB cable (used for almost all Android smartphones).You can supply power to board through the Micro USB connector or DC-jack. The voltage regulator (LDO) can deal with incoming voltage from 6V to 12V DC. Output current for 5V - about 800mA, for 3.3V - about 180mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects. We recomiende supply 7-9V.SPESIFIKASI :
Microcontroller : ATMega328
USB-TTL converter : CH340G
Power Out : 5V-800mA
Power IN. USB : 3.3V (180mA max.)
Power IN. VIN/DC Jack : 7-9V
Power Consumption : 5V 800mA
Logic Level : 5V
USB : Micro USB
Clock Frequency : 16MHz
Operating Supply Voltage : 5V
Digital I/O : 14(6-PWM)
Analog I/O : 8
Memory Size : 16Kb/32 Kb
Data RAM Type/Size : 2Kb
Data ROM Type/Size : 1Kb
Interface Type : ISP
Operating temperature : 40/+85
LengthWidth : 53.3468.58mm
KELENGKAPAN :
1pcs ROBOTDYN UNO R3 CH340G
Komponen pendukung atau alternatif yang mungkin antum butuhkan :
UNO R3 SMD CLONE WITHOUT CABLElink -
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan