Radial JD7 Jensen-equipped 2-channel Active Re-Amping Device

Raidal JD7 Injector Features:
- Dual Input Switch selects between guitars. Also activates the ballanced input switch on the rear panel.
- Drag control reintroduces the natural loading that occurs between your amplifier & guitar.
- Clip LED indicator keeps your signal out of the distortion zone!
- -8dB pad on input-2 for high output instruments like keyboards & active basses.
- Output #1 is the primary output and is always connected for primary grounding.
- ID strips for easy identification of channels - write on these with a removable marker.
- On-off switch with LED indicator on each output for quick visual reference.
- Ground lift & polarity reverse switches on outputs 2 to 6 to stop hum and correct phase of amps & effects.
- Effect loop switches for outputs 5 & 6 lets you insert effects and do a/b sound comparisons.
- Jensen transformer equiped outputs for optimum audio fidelity and 100% isolation with no ground loops.
- Welded 14-gauge steel frame with baked enamel finish for maximum durability.
- Innovative cable lock for the 15V DC power supply protects from accidental un-pluggings.
- An all discreet Class-A circuit is used for highest signal integrity. There are NO op-amps in the signal path!
- Separate send & return jacks for channels 5 & 6 to insert two independant and switchable effect loops.
- Separate Ground lifts for the XLR balanced Line-In and Line-Out connectors.
- Variable input level control allows precise level setting for playback of previosly recorded tracks.
- Balanced XLR input allows recorded dry tracks to be sent through the JD7 to feed several amps or effects.
- 180degrees polarity reverse flips Pin-2 and Pin-3 at the XLR output.
- Balanced XLR output is used to send a dry track to a recording device.
- Aux 'Direct' output is always on and is typically used for a guitar tuner.