2MHz Arbitrary Waveform Dual Channel Signal Generator 200MSa/s

Arbitrary waveform DDS signal generator from this series
Specifications:
Frequency Parameters
Frequency Range Sine Wave Normal Modes(Optional): 0Hz~2MHz / 0Hz~6MHz / 0Hz~12MHz / 0Hz~15MHz / 0Hz~20MHz / 0Hz~25MHz
Square Wave 0Hz~6MHz (Except the 2MHz Model)
Triangle Wave 0Hz~6MHz (Except the 2MHz Model)
Sawtooth Wave 0Hz~6MHz (Except the 2MHz Model)
Arbitrary Waveform 0Hz~6MHz (Except the 2MHz Model)
TTL Digital Signal Wave 0Hz~6MHz (Except the 2MHz Model)
The Min. Frequency Resolution 1Hz(0.000001Hz)
Frequency Error (+/-)5*10^(-6)
Frequency Stability (+/-)1*10^(-6)/3 Hours
Phase Adjustment Range 0~359
Phase Resolution 1
Waveform Parameters
Waveform Types Sine/Triangle/Square/Lifting Sawtooth Wave, Lorentz Pulse Wave and Arbitrary Waveform, etc.
Waveform Length 2048Points
Sampling Rate 200MSa/s
Vertical Resolution 12 Bits
Sine Wave Harmonic Arrived System 45dBc( 1MHz); 40dBc(1MHz~20MHz)
Distortion <0.8%(20Hz~20KHz, 0dBm)
Square Wave Lifting Along Time 20ns
Overshoot 0.5%
Duty Cycle Adjustment Range 0.1%~99.9%
Sawtooth Wave Linearity 98% (0.01Hz~10KHz)
Pulse Wave Pulse Width Adjusting Range 10nS~1S
TTL Output Level Rise/Down Time 20ns
Level Amplitude 0.3Vpp
Fan-out >20 TTL Load
CMOS Output Low Level 0.3V
High Level 1V~10V
Level Rise/Down Time 20ns
Output Parameters
Amplitude Range(Peak to Peak) 10mVpp~20Vpp
Amplitude Resolution 1mVp-p (-20dB Attenuation)
Amplitude Stability (+/-)0.5%/5 Hours
Amplitude Flatness (+/-)5%(<10MHz); (+/-)10%( 10MHz)
Waveform Output
Output Impedance 50(+/-10%) (Typical)
Protection All signals output can work above 60s under the condition of load short circuit
DC Bias
Bias Adjustment Range (+/-)10V
Bias Resolution 0.01V
External Measurements