Powder Coating Gun System for hobby user Tribo Powder Coat Spray Gun

Features:
Simple and reliable design
Does not require any additional power supply
Empty containers are available for sale. Keep all your powder in a separate containers
All spare parts are available for sale

How to use:
Prepare your workpiece by removing all the old paint and degreasing it
Spray a workpiece with a powder coating gun using powder of your chosen colour
Put a workpiece inside an oven (not included) for 20 minutes at 180 degrees celcius
Once workpiece is cool it is ready to be mounted and used.

How it works:
Powder coating gun works by charging powder particles inside gun using friction between powder and PTFE plastic. After this powder sticks to part by electrostatic charge. This is very similar to dust sticking to the screen of your computer or tv. Powder sticks securely and part can be shaken before curing. This process is different from other processes where powder is charged by up to 100 000 kilovolts to make it stick to part as it produces no orange peel effect that is often associated with powder coating. This process is also safer because of the absence of such high voltage.

Why better compared to liquid painting:
Almost no VOC (volatile organic compound)
Requires no special skills and is very easy to apply
Powder coating is one coat application
Coating can be more thicker
No paint run-offs that can be so frustrating using conventional liquid coating
Very chemical, abrassion and solvent resistant
Overspray can be recycled- no waste
Does not require facilities to dry parts for extended period
Requires lower air pressure

Specifications:
Model: NP-09-US
Required air pressure: 3-22 psi
Powder container size: 250ml
Air inlet: 1/4” NPT
Suitable powder type: Tribo
Country of manufacturing: Denmark