4.9/ 5.0
98% pembeli merasa puas
55 rating • 9 ulasan
5(51)92.73%
4(3)5.45%
3(0)0%
2(0)0%
1(1)1.82%
Atur jumlah dan catatan
Stok Total: 832
Subtotal
Rp600.000
Dial Indicator Mitutoyo & Magnetic Dial Stand Base Pick Test
Rp600.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Barang Teknik
Harga untuk 1 paket
>> Dial indikator toleransi 0,01
>> Magnetic Dial Stand Base
Barang Baru, Bagus, Kuat, Awet
Merk Dial indikator : Mitutoyo 2046S
Mitutoyo MIT2046S Details
Mitutoyo 2046S multi-revolution dial indicator suited to general measurement applications. The dual-reading scale aids measurement in both directions. Designed to be attached to machinery jigs and fixtures. The contact point detects the slightest deviation which is registered on the dial of the indicator.
Series 2 dial indicators are Mitutoyo's most popular, and have the widest application.
The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can easily be installed and removed without tools.
Secure adhesion between the bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
The spindle is made of high strength quench hardened stainless steel which resists arduous use.
A carbide contact point is used, special alloy is used for the sector gears to provide improved wear resistance.
Application of a hard coating on the surface of the crystal makes the gauge highly scratch and chemical resistant
Measuring range: - 10mm.
Graduation: - 0.01mm.
Scale: - 0-100.
Range per revolution: - 1mm.
Accuracy: - +- 0.013mm.
Hystersis: 0.005mm.
>> Dial indikator toleransi 0,01
>> Magnetic Dial Stand Base
Barang Baru, Bagus, Kuat, Awet
Merk Dial indikator : Mitutoyo 2046S
Mitutoyo MIT2046S Details
Mitutoyo 2046S multi-revolution dial indicator suited to general measurement applications. The dual-reading scale aids measurement in both directions. Designed to be attached to machinery jigs and fixtures. The contact point detects the slightest deviation which is registered on the dial of the indicator.
Series 2 dial indicators are Mitutoyo's most popular, and have the widest application.
The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can easily be installed and removed without tools.
Secure adhesion between the bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
The spindle is made of high strength quench hardened stainless steel which resists arduous use.
A carbide contact point is used, special alloy is used for the sector gears to provide improved wear resistance.
Application of a hard coating on the surface of the crystal makes the gauge highly scratch and chemical resistant
Measuring range: - 10mm.
Graduation: - 0.01mm.
Scale: - 0-100.
Range per revolution: - 1mm.
Accuracy: - +- 0.013mm.
Hystersis: 0.005mm.
Ada masalah dengan produk ini?