Atur jumlah dan catatan
Stok Total: Sisa 3
Subtotal
Rp1.875.000
MAGNEHELIC/DWYER diffential pressure gauge range 0-60 pa
Rp1.875.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: pertukangan
PM untuk Cek terlebih dahulu ketersediaan barang..
2000-60PA Differential pressure gage, range 0-60 Pa, minor divisions 2.0, calibrated for vertical scale position.
Select the SERIES 2000 Magnehelic Gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple,
Product Applications
1. Filter Monitoring
2. Air Velocity with Dwyer Pitot Tube
3. Blower Vacuum Monitoring
4. Fan Pressure Indication
Specifications
Service: Air and non-combustible, compatible gases. (Natural Gas option available.)
Note: May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Wetted Materials: Consult factory.
Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy: 2% of FS (3% on -0, -100PA, -125PA, -10MM and 4% on -00, -60PA, -6MM ranges), throughout range at 70F (21.1C).
Pressure Limits: -20 in Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
Temperature Limits: 20 to 140F (-6.67 to 60C). -20F (-28C) with low temperature option.
Size: 4" (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orienns.
Process Connections: 1/8"
2000-60PA Differential pressure gage, range 0-60 Pa, minor divisions 2.0, calibrated for vertical scale position.
Select the SERIES 2000 Magnehelic Gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple,
Product Applications
1. Filter Monitoring
2. Air Velocity with Dwyer Pitot Tube
3. Blower Vacuum Monitoring
4. Fan Pressure Indication
Specifications
Service: Air and non-combustible, compatible gases. (Natural Gas option available.)
Note: May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Wetted Materials: Consult factory.
Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy: 2% of FS (3% on -0, -100PA, -125PA, -10MM and 4% on -00, -60PA, -6MM ranges), throughout range at 70F (21.1C).
Pressure Limits: -20 in Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
Temperature Limits: 20 to 140F (-6.67 to 60C). -20F (-28C) with low temperature option.
Size: 4" (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orienns.
Process Connections: 1/8"
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan