GPS Ublox Neo-6M NEO6MV2 Module with Flight Control EEPROM WMC APM 2.5

Module parameters

1. VCC : 3.3-5.5V
Current : 50 mA
Power Saving Mode: 30 mA

2. Temperature
Operating Temp -40 ° C to + 85 ° C

 3. Pin descriptions and electrical connections
Module pin
#1 VCC Power input pin 3.3-5.5V
#2 GND Power ground
#3 RXD Module serial port to receive the foot - then single-chip serial port TXD sent
#4 TXD Module serial send pin - then the microcontroller serial RXD reception
#5 PPS Clock pulse output pin
Module PPS feet connected to the red LED lights
**On: Normal operation, but not positioned. **Blinking: The positioning was successful

 4. Baud rate
Default baud rate for the module is 9600

 5. Characteristic parameters
Module comes with ceramic antenna, another IPEX interface can be connected to other active antenna



Neo6M mini : https://www.tokopedia.com/rajacell/ublox-neo-6m-gps-module-neo6mv2-with-flight-control-for-arduino

Neo6M V2 : https://www.tokopedia.com/rajacell/gps-module-gy-neo6m-v2-ublox-serial-gps-for-arduino

Neo7M : https://www.tokopedia.com/rajacell/new-ublox-neo-7m-gps-module-flight-controller-built-in-data-memory

Neo8M : https://www.tokopedia.com/rajacell/ublox-gpsv5-neo-m8n-gps-module-gnss-hmc5983-saw-lna-triple-band-antena-m-delapan-m

Neo6M Double Antena : https://www.tokopedia.com/rajacell/module-gps-ublox-neo-6m-v2-neo-6m-micro-usb-double-antena-for-arduino

Neo7M Double Antena : https://www.tokopedia.com/rajacell/module-gps-ublox-neo-7m-v2-neo-7m-micro-usb-double-antena-for-arduino