L298P Motor Shield Driver Motor DC High Power Dual Bridge + Bluetooth

Features: Drive two DC motors at 4.8-24V at up to 2A peak(1.0 continuous max) current Built-in Schottky diodes to protect against motor back EMF Drive 1 servo motor with a dedicated 5V regulated power Built-in buzzer connected to D4, active high Extra push button as Arduino reset switch Bluetooth connector (x2) Ultrasonic Range Finder Ping socket for SR04 (Ping and Echo) RGB LED connector 6 analog/digital pins(A0 to A5) brought out to 3-pin headers(SVG) with 5V and Gnd available for each input for easy sensor hookup Stacking female connectors for supporting another daughter card Can optionally power attached Arduino off the shield + Bluetooth pin Interface (Tidak Termasuk module Bluetooth, module Bluetooth HC05 dan 06 dijual terpisah ) L298P PWM Speed Controller Dual High-Power H-bridge Driver ,Bluetooth Interface, L298P Motor Shield Board for Arduino Technical Specifications: 1logical part ofthe input voltageVD: 5V 2.-drivenpart of the inputvoltageVS: VINInput6.5 ~ 12V, PWRIN4.8 ~ 35Vinput 3logicalpart of the workcurrentIss: lt;36mA 4.-drivenpart of theoperating currentIo: lt;2A 5maximum power dissipation: 25W (T = 75Celsius) 6.controlsignalinput level:High2.3Vlow-0.3V 7Working temperature: -25 + 130Celsius 8hardware interface: 5.0mmpitchterminal 9beltclipandcan be controlledviafront rowaccesssignal 10.Drive Type:DualpowerH-bridge driver 11Pinoccupancy: D4 ~ D7directdrive motor 12supportsPWM / PLLmodemotor speedcontrol