Inverter Invertek Optidrive E3 IP20 4kW 230V 1ph to 3ph AC Inverter Drive, DBr, Unfiltered

Invertek Optidrive E3 IP20 series AC Inverter for 4kW (5HP) 230V three phase motor in VxF or sensorless vector control to 15.3A. Converts fixed frequency single phase 230V input to variable frequency 230V to control the speed of a IE2, IE3 or IE4 standard AC Induction Motor, Permanent Magnet motor, Brushless DC Motor or Synchronous Reluctance Motor. Size 3: 131mm Wide x 175mm Deep x 261mm High. IP20. Weight: 3.2kg. Overload: 150% x 60 seconds, 175% x 2.5 seconds Speed Control Range: 0-500Hz. Braking (DBr): To 25 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the #39;Which Resistor #39; button on this page. Integrated operator keypad with LED display, 2 Digital Inputs, 2 Analogue/Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set, RJ45 socket for Modbus RTU or CANopen communications over RS485. Input Current: 29.2A Input Voltage: 200-240V Single Phase ±10% (max 240V) at 50-60Hz ±5% EMC Compliance: No integrated EMC filters (Unfiltered). Cubicle mount. Rated 50° Ambient. Ventilation space in front: [Not Specified] Ventilation space above and below: 100mm Ventilation space at sides: 50mm Mounting via 4 x 5.5mm holes at rear on 80mm x 247mm centres. Manufacturer part number is ODE-3-320153-1042. Made in the UK. Garansi 1 Tahun. Kami menjamin semua produk di toko kami 100% asli, berkualitas dan berfungsi dengan baik.