Modul BMS 2s 7A 8A Protection Board 18650 - BMS 2S 8A

Modul BMS tidak ada garansi
no retur
membeli berarti setuju

BMS 2S 7A
Features:
1) high-accuracy voltage detection circuit;
2) terminal of the charger using high voltage device;
3) Built-in three-stage over-current detection circuit (over-current 1, over-current 2, load short circuit);
4) MOS transistor can control the battery charge and discharge;

Specifications:
Upper limit current: 7A Storage conditions: -40-- +80℃

Quiescent current: less than 10uA Effective life: more than 50000 hours

Internal resistance: less than 300mΩ Short circuit protection: can be protected, need to be charged to restore

Charging voltage: 8.4v-9v

Connection description:
B+ connect to battery+
B- connect to battery-
P+ for battery output input+
P- for battery output input-

BMS 2S 8A
This protection board cannot be used for lithium iron phosphate batteries, xenon lamps, hand electric drill battery packs, electric fish machine battery packs, electric bicycle battery packs, children's car batteries, motors above 775 (4A), and 1W fisheye LED lights. Customers who buy in combination please pay attention! .

The properties of the lithium battery protection board:
Model: HX-2S-A10 Overcharge voltage range: 4.25-4.35v±0.05v
Upper limit working current: 8A Working temperature: -40---+50℃
Upper limit instantaneous current: 16A Storage condition: -40-- +80℃
Static current: less than 10uA Effective life: more than 50000 hours
Internal resistance: less than 300mΩ Short circuit protection: can be protected, need to charge to restore
Charging voltage: 8.4V-9V
The size of the protection board and device description;

Welding point description:
B+ is connected to the positive pole of the battery;
B - connected to the negative pole of the battery;
BM is connected to the connection point before battery 1 and battery 2;
P+ is connected to the positive pole of the charging/discharging terminal (commonly used for charging and discharging terminals);
P- is connected to the negative pole of the charging/discharging terminal (the charging terminal and the discharging terminal are shared).