1 Remote Control Switch Transmitter For Joy Tech Sliding Gate Opener PY600AC SL500 PY800(Not Battery), Not For Other Motor Use

Produk kami menggunakan ssitem preorder di kirim langsung dari China-Indo, akan dikirim setelah sampai Indo
Estimasi 3-4 mingguan The packing List : 1 pc Remote key
This remote controller(with 433MHZ, HCS301,) is only for a specific gate opener as following pics; not compatible with other motors.battery not included in the remote controller


Alkaline Battery：DC12V，27A （ is not Included in the packing）
if you demand the video or manual of remote studying, pls message us.
Remote control distance: over 60m linear distance (over 20m in ordinary residential area)
Also Compatible with:
- PY300DC
- PY800AC
- PY500AC
- PY1400AC
- PY600M
- PY500
- PYM-A2204
- PY600L
- SL600AC
- DKC500
- DKC800
Remote control operation
Three button mode remote control: OPEN/CLOSE/STOP of main engine are controlled by three buttons separately on the remote control.
Single button mode remote control: OPEN/CLOSE/STOP of main engine are controlled by one button circularly on the remote control.
Add extra remote control (remote control learning):Remove the main engine housing, then take out the upper cover of the control box, press the learning button AN1 on the control board, and indicator light LED2 will flash. Press the button that to be learned on the remote control once, The LED2 will be off. Press the same button on the remote control twice, the LED2 will flash several times and be off; remote control learning complete. A maximum of 25 remote controls can be learned.

Delete remote control:To delete remote control that have been learned: press and hold the learning button AN1, the indicator light LED2 will be on; Then release it until LED2 is off. After the steps, all the matched remote controls will be deleted.

Note: To disengage gate opener, move the gate to the middle position, then close the clutch and press the open button of external button switch to open the gate. If the gate opening direction is wrong, you can change the direction through the toggle switch SW1 on the control board or exchange the motor phase-sequence lines U and W. If the opening or closing limit is wrong, please exchange limit switch lines CLLM and OPLM on the control board.


Specifications:
Direction: None
Security Mode: Fail Secure with Signal
Model Number: JY-RC001
Brand Name: chisung
Origin: Mainland China
Certification: CE
Smart home platform: other
remote controller: 433MHZ, HCS301