Jeyi Visual Smart M.2 Nvme / Sata Ssd Enclosure, Usb 3.2 Gen 2

Selamat Datang di Toko Kami. - Kami Menjual Produk-produk Import - Produk Dikirim dari Luar Negeri. - Estimasi Kiriman 5-15 Hari. Mohon Menunggu Supporting Hard Drive Capacity : 4TB External Interface : USB Package : Yes Internal Interface : NVME/SATA Case Material : Aluminum Size : 1.8 #34; Model Number : i9x New Upgrade Function 1. 3 clicks to reconnect the drive (no need to disconnect the cable) 2. 5 clicks to turn on write protection (exit requires unplugging the cable again) 3. Multi-color LEDs JEYI i9X Display Visual Dual M.2 Protocol SSD Enclosure 1. Built-in RTL9210B dual protocol 10G high-speed master control theoretical read/write speed up to 1000M. Support both NVMe protocol and SATA protocol. 2. Supports TRIM, ASPM, UASP acceleration, and sleep mode 3. Plug-and-play, allowing data transmission across multiple devices such as desktops, laptops, cell phones, tablets, cameras, etc. at high speed across platforms and scenes 4. Compact body with good feel Length only 103mm Width only 32.5mm Thickness only 11.5mm 5. Multi-fin on all sides to support heat dissipation, so that the disk is always running at normal temperature, and always take care of the disk. It Can Also Display Conncecting USB 2.0 - 5 seconds Orange Conncecting USB 3.0 5G - 5 seconds Green Conncecting USB 3.2 10G - 5 seconds Purple Write-protected - remains in a static blue state Reading - the light flashes rapidly in succession Sleep Mode - multi-color breathing light effect After Safe Ejection - in stand by mode - breathing light effect for #34;USB 2.0 Orange #34; #34;USB3.0 Blue #34; #34;USB3.1 Purple #34; 1G File Transfer in 1 Second NVMe enclosure adopts USB 3.1 Gen 2 transfer speed up to 10Gbps NOTE: SATA SSD ONLY SUPPORT 6Gbps (600Mb/s Max) How to set write protection ( ) Enter write protect: touch the screen 5 times, then re-plug the cable to enter protect mode (red light to long blue) Exit write protect: touch the screen 5 times, then re-plug the cable exit protect mode