High Voltage Power Supply Module 3-5V Step-up 1000V DC Voltage Regulator Adjustable DC Regulator Module Output Current 2 - 20mA

High Voltage Power Supply Module 3-5V Step-up 1000V DC Voltage Regulator Adjustable DC Regulator Module Output Current 2 - 20mA
1005005785543200

Pre-Order +/- Sampai Alamat 10-15 Hari
FREE ONGKIR+PAJAK
Garansi uang kembali jika Rusak, Beda Produk

aliexpress
High Voltage DC Voltage Regulator 3-5V Step-up 1000V Step Up Power Supply Adjustable DC Regulator Module Output Current 2 - 20mA

Specification:

Support for more than DC output voltage when 5V input

Module size: about 25 * 48mm/0.98*1.88'' (W * L)

Output current: 2 ~ 20mA. (If you want to add the current, pls put insurance under the transformer replaced the 0-ohm resistor, maximum 50mA, but not recommended increased.)

When the input voltage is 5 v, the output voltage can be adjusted in 280 ~ 1200 v.

When the input voltage is 6 ~ 12v, the output voltage can be adjusted in 400 ~ 1200v.

The capacitor can be charged, but the charging speed is a bit slow, please note.

Like the power of the output module module, it is not possible for the sensor.

Corresponding Product Description: This module is used in security products, stability is quite good

This module with AC output, output around AC 75 v, but can not be adjusted

Product test model:

1. Please refer to the main map, the new output products are generally stable, of course, if you test the output voltage is unstable, you can add a current limiting resistance to the test, usually this problem does not occur.

2. When adjusting the recommended output add a resistance rectifier like the following picture.

Warm Reminder:

This product is supported by the housing (3D PLA printing shell, full-toxic configuration, printing a housing needs an hour long)

Note:

Please allow 1-3mm differs due to manual measurement.

Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.

1