Manual-Calibration Fiberoptic Sensor Fiber Amplifier NPN KEYENCE FS-M1

Manual-Calibration Fiberoptic Sensor Fiber Amplifier NPN KEYENCE FS-M1
Manual-Calibration Fiberoptic Sensor FS-V/T/M series (FS01) FS-M1 Fiber Amplifier, Cable Type, Main Unit, NPN
Model

FS-M1

Type

Main unit

Output

NPN

Light source

Red LED

Sensitivity adjustment/Mode selection

8-turn trimmer (with indicator), FINE/TURBO (switch-selectable)

Response time

250 s (FINE) /500 s (TURBO)

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output: Red LED
Stable operation: Green LED

Timer function

ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)

Input



Control output

NPN open-collector 100 mA max. (24 VDC max.), Residual voltage: 1 V max.

Stability output

NPN open-collector 50 mA max. (40 VDC max.), Residual voltage: 1 V max. *1

Protection circuit

Reversed polarity protection, over-current protection, surge absorber

Unit expansion

Up to 16 expansion units can be connected (a total of 17 units).*2

Mutual interference suppression

FINE : 4, TURBO/SUPER: 8

Rating

Power voltage

12 to 24 VDC 10 %, Ripple (P-P) 10 % or less

Current consumption

35 mA or less

Environmental resistance

Ambient light

Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.

Ambient temperature

-10 to +55 C 14 to 131 F (No freezing)*3

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s2, 3 times in each of the X, Y, and Z directions

Case material

Polycarbonate

Weight

Approx. 75 g
*WAJIB LAMPIRKAN VIDEO PROSES PEMBUKAAN PAKET
HARAP PERIKSA KELENGKAPAN DAN KONDISI BARANG
BATAS KOMPLAIN 2x24 JAM SETELAH BARANG TIBA
TANPA VIDEO UNBOXING KAMI BERHAK MENOLAK PENGAJUAN