5.0/ 5.0
100% pembeli merasa puas
3 rating • 2 ulasan
5(3)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 4
Subtotal
Rp1.700.000
MAMBA MK4 F722 MINI F40 128K Flight Controller Stack
Rp1.700.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: FPV Flight Controller & PDB
Diatone’s Mamba MK4 (fourth generation) stack is a redesign of its already fantastic line of flight controllers and ESCs. Improvements include making the products easier to use by increasing soldering pad sizes by 30%, pad spacing by 100%, , and more.
A completely different pad style has been redesigned to increase pad area by 30% and pad spacing by 100%, reducing solder errors and associated failures.
1. The pad area increased by 30%
2. Pad spacing increased by 100%
3. MP9943 synchronous rectifier BEC
4. MINI series upgrade DJI interface and 5v 15W/9V 18W 2 set BEC
5. The whole series use USB Type-C
6. The whole series support 6 Set UART and I2C
7. A full range of integrated Flash and Baro
7. 4 Set Power Protection
8. 32Bit ESC all support 128K
9. Mini series FC uses 2mm and 3mm mounting holes, special dampening ring
10. Upgrade the twisted pair anti-jamming cable and reinforcement process
Specifications:
F722 MINI MK4 FLIGHT CONTROLLER
- MCU: STM32F722
- Frequency: 216MHz
- Gyro: Gyro ICM42688P
- Barometer: SPL06
- OSD: AT 7456E
- Blackbox: 16M Memory
- Barometer: Yes
- UARTS: 6 Sets
- I2C: Yes
- F.Port: Yes
- Buzzer: Yes
- Current: Yes
- ESC Signal: 8 Sets
- BEC 3.3V: 0.5A
- BEC 5V: 2.5A
- BEC 9V: 2A
- MB LED: Yes
- BF LED: Yes
- Air Unit Port: Yes
- VTX Switch: Yes
- BEC Protection: Yes
- Receiver Protection: Yes
- TVS Protection: Yes
- Input: 6S LiPo
- Firmware: Betaflight
- Mounting: 20.0×20.0mm,M3/M2
- Size: 29.0×29.5×6.5mm
- Weight: 6.0g
F40_128K MINI 4-IN-1 ESC
- Input Voltage: 6S LiPo (25.2V)
- CURR : Yes
- Output Current : 40A
- Peak Current : 45A
- BLHeli : BLHeli 32
- Target: MAMBA F40_128K MINI
- Protocol : DShot300/600/1200
- PWM: 24~128K
- Mounting Size: 20x20mm, M2
- Dimensions: 31.0×31.0x6.5mm
- Weight : 6.5 gr
A completely different pad style has been redesigned to increase pad area by 30% and pad spacing by 100%, reducing solder errors and associated failures.
1. The pad area increased by 30%
2. Pad spacing increased by 100%
3. MP9943 synchronous rectifier BEC
4. MINI series upgrade DJI interface and 5v 15W/9V 18W 2 set BEC
5. The whole series use USB Type-C
6. The whole series support 6 Set UART and I2C
7. A full range of integrated Flash and Baro
7. 4 Set Power Protection
8. 32Bit ESC all support 128K
9. Mini series FC uses 2mm and 3mm mounting holes, special dampening ring
10. Upgrade the twisted pair anti-jamming cable and reinforcement process
Specifications:
F722 MINI MK4 FLIGHT CONTROLLER
- MCU: STM32F722
- Frequency: 216MHz
- Gyro: Gyro ICM42688P
- Barometer: SPL06
- OSD: AT 7456E
- Blackbox: 16M Memory
- Barometer: Yes
- UARTS: 6 Sets
- I2C: Yes
- F.Port: Yes
- Buzzer: Yes
- Current: Yes
- ESC Signal: 8 Sets
- BEC 3.3V: 0.5A
- BEC 5V: 2.5A
- BEC 9V: 2A
- MB LED: Yes
- BF LED: Yes
- Air Unit Port: Yes
- VTX Switch: Yes
- BEC Protection: Yes
- Receiver Protection: Yes
- TVS Protection: Yes
- Input: 6S LiPo
- Firmware: Betaflight
- Mounting: 20.0×20.0mm,M3/M2
- Size: 29.0×29.5×6.5mm
- Weight: 6.0g
F40_128K MINI 4-IN-1 ESC
- Input Voltage: 6S LiPo (25.2V)
- CURR : Yes
- Output Current : 40A
- Peak Current : 45A
- BLHeli : BLHeli 32
- Target: MAMBA F40_128K MINI
- Protocol : DShot300/600/1200
- PWM: 24~128K
- Mounting Size: 20x20mm, M2
- Dimensions: 31.0×31.0x6.5mm
- Weight : 6.5 gr
Ada masalah dengan produk ini?