Jumper R8 16CH RC Receiver

Kompatibel T16 FrSky D16 D8 Mode Dukungan PIX PX4 APM Pengendali Penerbangan PWM SBUS Output. The Jumper R8 is a 2.4Ghz receiver that integrates MAVlink telemetry so you can show data from your Pixhawk/PX4 drone on your compatible radio like the Jumper T16, or Frsky Taranis. The R8 receiver is the first receiver that can directly transmit the PIX and PX4 flight control data to your R/C controller. This can be used to display the flight control data directly on your radio. Apart from this is it just like any other 8 channel SBUS/PWM R/C receiver. Bottom line if you are looking for an R/C link to your Pixhawk drone, this is the receiver you should consider. Spesifikasi: Nama barang: Jumper R8 Penerima Jumlah saluran: 8ch (PWM) / 16ch (SBUS) Output RSSI (Signal Strength Indication): PWM Kisaran tegangan operasi: 4.0 ~ 8.4V Kisaran operasi saat ini: 100mA @ 5V Jarak efektif: jarak penuh ( gt; 2,0km) Berat: 10g Kompatibilitas: FrSky D8 mode D16 Fitur: - Lebih banyak saluran: 1-8 saluran dari keluaran saluran tradisional, 1-16 saluran dari port SBUS - Output RSSI: output tegangan analog (03.3V) - Transmisi dupleks penuh dua arah (Telemetri) Dengan output RSSI: output tegangan analog (03.3V) Metode kode pasangan: 1. Tekan tombol bind pada receiver, LED menyala merah / hijau menyala 2. Di sisi radio, pilih protokol Frsky D16 (T12 / T16: Multi Frsky D16); 3. Ketika LED Merah berkedip, penjilidan berhasil. 4. Setelah mengikat, tarik mode penjilidan dan hidupkan kembali penerima. Led Hijau menyala solid. Deskripsi warna LED. (Lampu hijau selalu menyala: sinyalnya baik; lampu hijau berkedip: sinyalnya buruk; lampu merah selalu menyala: sinyalnya hilang) Isi Kemasan: 1 x R8 Penerima