Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp902.000
MPS2280D Raspberry Pi5 PCIe to M.2 NVMe Dual SSD Adapter Board HAT Pi5 Double 2280 (Support BOOT from NVME SSD
Rp902.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
MPS2280D Raspberry Pi5 PCIe to M.2 NVMe Dual SSD Adapter Board HAT Pi5 Double 2280 (Support BOOT from NVME SSD
Sebelum order mohon dibaca rincian pd deskripsi :)
- Barang dikirim langsung dr Luar Negeri
- Estimasi pengiriman 15 Harian Sampai Alamat
- harga yang dipajang sudah full payment tapi sewaktu- waktu harga bisa saja berubah berdasarkan ketentuan cukai !!
- Packing Safety, Seller Amanah :)
- Jaminan uang kembali jika barang diterima tidak sesuai !!!
【Note】
[] Do not include Raspberry Pi5 and NVME SSD
【Overview】
[] Supports 2230/2242/2280 sizes of solid-state drives (only 2280 copper pillars are welded by default).
[] Only for storage expansion,not for booting from the sSD drive.Only support PCIE 1x Gen2.
[] Enable the NVME SSD by add following command in the config.txt
[] dtparam=nvme
[] Can power the M.2 card directly from the FPC PCle ribbon (port providing at least 1.5A at 5V ofcontinuous power) or through an optional 2-pin pitch bundle for redundant power supply (up to3A at 5V).
[] The board's dimension is 56x86mm, it's slight longer than the Raspberry Pi 5 PCB.
[] Weve made a slot at 40Pin on the board, which doesn't interfere with DuPont wire connections.
【Details】
[] Does not affect the use of Raspberry Pi 5 40pin GPIO
【Assembly direction】
【Outline Dimensions】
[]lmportant Notice: Please be aware that booting from NVMe storage through a PCleswitch is currently not supported. Users planning to utilize NVMe storage should considerthis limitation when designing their projects.
Package Contains
[] MPS2280D x1
Specifications:
Hign-concerned Chemical: None
Compatible With: Raspberry Pi
Accessory Type: Extension Board
Brand Name: spotpear
Origin: Mainland China
Sebelum order mohon dibaca rincian pd deskripsi :)
- Barang dikirim langsung dr Luar Negeri
- Estimasi pengiriman 15 Harian Sampai Alamat
- harga yang dipajang sudah full payment tapi sewaktu- waktu harga bisa saja berubah berdasarkan ketentuan cukai !!
- Packing Safety, Seller Amanah :)
- Jaminan uang kembali jika barang diterima tidak sesuai !!!
【Note】
[] Do not include Raspberry Pi5 and NVME SSD
【Overview】
[] Supports 2230/2242/2280 sizes of solid-state drives (only 2280 copper pillars are welded by default).
[] Only for storage expansion,not for booting from the sSD drive.Only support PCIE 1x Gen2.
[] Enable the NVME SSD by add following command in the config.txt
[] dtparam=nvme
[] Can power the M.2 card directly from the FPC PCle ribbon (port providing at least 1.5A at 5V ofcontinuous power) or through an optional 2-pin pitch bundle for redundant power supply (up to3A at 5V).
[] The board's dimension is 56x86mm, it's slight longer than the Raspberry Pi 5 PCB.
[] Weve made a slot at 40Pin on the board, which doesn't interfere with DuPont wire connections.
【Details】
[] Does not affect the use of Raspberry Pi 5 40pin GPIO
【Assembly direction】
【Outline Dimensions】
[]lmportant Notice: Please be aware that booting from NVMe storage through a PCleswitch is currently not supported. Users planning to utilize NVMe storage should considerthis limitation when designing their projects.
Package Contains
[] MPS2280D x1
Specifications:
Hign-concerned Chemical: None
Compatible With: Raspberry Pi
Accessory Type: Extension Board
Brand Name: spotpear
Origin: Mainland China
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan