DUMBORC X6F X6FG 6 CHANNELS 2.4GHZ RECEIVER FOR X6 X4 X5 TRANSMITTER

Original Replacement Dumborc X6FG (With Gyro) / X6F Receiver

Binding Method :
1. The distance between the transmitter and receiver is about 30-50 cm.
2. Turn on the transmitter, then power on the X6FG.
3. Press the black binding button of the receiver in one second until the receiver light starts blinking and release, the binding will be successful when the LED always on.

Notes for gyroscope mode :
1. Working Mode switching method :
X6FG receiver defaults normal mode(Green Light),quick press the binding botton 3 times within 1 second to switch to gyro mode(Yellow Light).
2. Check Servo Direction :
When using gyro mode,make sure your servo direction is correct. Normally, the wheels should turn right to correct when the car is turned left, while the wheels should turn left to correct when the car is turned right. If the servo direction is reversed, short press binding button twice within 1s. The Red indicator flashes twice means correction completed.
3. Gyro Sensitivity adjustment :
Adjust by channel 6, especially suitable for racing or drifting cars.

Compatible with controller :
X6(Normal/Gyro Mode) / X4(Normal Mode) / X5(Normal Mode)

X6FG Receiver Specifications :
- Channel : 6
- Model : Cars/boats/Tanks/trucks/Crawlers/Buggies/Racing car and so on
- Control Distance : more than 400m
- Spread Spectrum : FHSS
- Antenna Length : 200mm
- Work Current : 30mA
- Power Supply : 4.8~10.0V DC
- RF Power : <10dbm
- Channel Resolution : 4096
- Size : 1.37*0.79*0.51in(35*20*13mm), fits most model size
- Weight : 6g

P6F(G) Receiver Specifications :
- Item Number : P6FG
- Condition : 100% Brand New
- Brand : DumboRC
- Material : Plastic + Electronic Components
- Color : Black
- Suitable for : Car/Boat/Tank
- Spark Anti-interference
- Channel : 6CH
- Modulation Mode : GFSK
- Spread Spectrum : FHSS
- Control Distance : More than 400 meters
- Receiver Voltage Range : 3.3-10V
- Receiver Operating Current : 30mA
- Support HV servo, and maximum servo voltage is 10V.
- Support