Atur jumlah dan catatan
Stok Total: 59908
Subtotal
Rp95.000
USB Small Fan Circuit Board 3.7V Battery Charger Module Micro USB Fan Governor Wind Speed Controller
Rp95.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Features:
1.Made of high-quality materials, with a long service life
2.Equipped with a charging light, with a red light for charging and a green light for full charging
3.Multiple versions can be selected, and suitable models can be selected according to needs
4.Equipped with anti reverse connection design, output short circuit protection, low battery protection, etc
5.Small size design, suitable for various small fan modifications, repairs, etc
Parameters:
9V battery version:
Output: 5V/7V/9V (3rd gear version)
Charging input: 5V 1A Micro USB
Motor: 9V version OUT (output) 5V-1, 7V-2, 9V-3 (+- error 1V) within 0.5A, overload heating
Charging: IN (input) 5V--0.9A
Independent charging management 4056 power management chip (charging heat is a normal phenomenon)
Battery: IN (input) 3V-4.2V (protection below 3V) Flashing running light reminder when less than 3.2V
Charging light: Red light on when charging, green light on when fully charged (2-light version compatible with running light)
If the output driving current exceeds 0.1-0.6A, the heating voltage will decrease or the protection shutdown will occur. Do not overload.
Standby current: 0.3uA (minimum), basically without power consumption. The battery has anti reverse connection design, output short circuit protection, and low battery protection.
9V plug-in power supply version:
Micro USB input voltage: must be 5V 2A
Power: 7W
Drive current: 0.5A
Motor: 9V version OUT (output) 5V-1, 7V-2, 9V-3 (+- error 1V) within 0.5A, overload heating
12V battery version:
Output: 6V/9V/12V (3rd gear version)
12V, 1st gear version, direct 12V, off 0V
Charging input: 5V 1A Micro USB
Motor: 12V version OUT (output) 6V-1, 9V-2, 12V-3 (+- error 2V), within 0.5A, overload heating
Charging: IN (input) 5V--0.9A
Independent charging management 4056 power management chip (charging heat is a normal phenomenon)
Battery: IN (input) 3V-4.2V (protection below 3V) Flashing running light reminder when less than 3.2V
Charging light: Red light on when
1.Made of high-quality materials, with a long service life
2.Equipped with a charging light, with a red light for charging and a green light for full charging
3.Multiple versions can be selected, and suitable models can be selected according to needs
4.Equipped with anti reverse connection design, output short circuit protection, low battery protection, etc
5.Small size design, suitable for various small fan modifications, repairs, etc
Parameters:
9V battery version:
Output: 5V/7V/9V (3rd gear version)
Charging input: 5V 1A Micro USB
Motor: 9V version OUT (output) 5V-1, 7V-2, 9V-3 (+- error 1V) within 0.5A, overload heating
Charging: IN (input) 5V--0.9A
Independent charging management 4056 power management chip (charging heat is a normal phenomenon)
Battery: IN (input) 3V-4.2V (protection below 3V) Flashing running light reminder when less than 3.2V
Charging light: Red light on when charging, green light on when fully charged (2-light version compatible with running light)
If the output driving current exceeds 0.1-0.6A, the heating voltage will decrease or the protection shutdown will occur. Do not overload.
Standby current: 0.3uA (minimum), basically without power consumption. The battery has anti reverse connection design, output short circuit protection, and low battery protection.
9V plug-in power supply version:
Micro USB input voltage: must be 5V 2A
Power: 7W
Drive current: 0.5A
Motor: 9V version OUT (output) 5V-1, 7V-2, 9V-3 (+- error 1V) within 0.5A, overload heating
12V battery version:
Output: 6V/9V/12V (3rd gear version)
12V, 1st gear version, direct 12V, off 0V
Charging input: 5V 1A Micro USB
Motor: 12V version OUT (output) 6V-1, 9V-2, 12V-3 (+- error 2V), within 0.5A, overload heating
Charging: IN (input) 5V--0.9A
Independent charging management 4056 power management chip (charging heat is a normal phenomenon)
Battery: IN (input) 3V-4.2V (protection below 3V) Flashing running light reminder when less than 3.2V
Charging light: Red light on when
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan