A203 (Version 2) Carrier Board for Jetson Nano/Xavier NX/TX2 NX

DESCRIPTION :
A203 Version 2 is an updated version of A203. It adds additional pins and one USB 3.0 20-pin ZIF Connector. It is a high-performance, interface rich NVIDIA Jetson Nano / Xavier NX/TX2 NX compatible carrier board, providing HDMI 2.0, Gigabit Ethernet, USB3.0, M.2 key E Wifi / BT, M.2 key M solid-state drive, CSI camera, RS232, SD card, CAN, PIO, I2C, I2S, fan and other rich peripheral interfaces are suitable for environments with strict environmental requirements, small size and powerful functions.

`APPLICATION :
☞ Home robots
☞ UAVs
☞ Unmanned boats
☞ Drone
☞ Unmanned submarines
☞ Sentiment Analysis

SPECIFICATION :
☞ HDMI Port : HDMI Right Angle Vertical Connector
☞ USB 3.0 Type A : 2* USB 3.0 Link 1 Type-A Connector
☞ NVIDIA Gigabit Ethernet : RJ45 Gigabit Ethernet Connector (10/100/1000)
☞ DC Power : DC Input Power TE Connector
☞ USB 2.0 : USB 2.0 Micro-AB Connector
☞ FAN Connector : Picoblade Header
☞ SD Card : 1x MicroSD Card Slot
☞ M.2 Key E : PCI-E 2230 Size
☞ CSI Camera : 1x CSI Camera
☞ USB 3.0 ZIF Connector : USB 3.0 0.5mm pitch 20 pin ZIF
☞ RTC Connector : 3V, 2 pin
☞ M.2 Key M Disk : Disk size 2242
☞ NVIDIA Jetson Nano/NX/TX2 NX : Nano/NX/TX2 NX 260 PIN Connector
☞ Multifunctional port : 2.0 PITCH 40 PIN (such as UART, GPIO, SPI, etc.)
☞ Multifunctional port : 2.0 PITCH 14 PIN (Reset, CAN, Recovery, etc.)

PART LIST :
☞ 1 x A203 v2 Carrier Board
☞ 1 x Power Adapter 90W 19V (power cable not included)
☞ 1x Exchange line (XT30 female to DC Power Jack male)

DOCUMENTS :
☞ https://www.seeedstudio.com/A203-Carrier-Board-for-Jetson-Nano-Xavier-NX-V2-p-5214.html