5.0/ 5.0
100% pembeli merasa puas
23 rating • 9 ulasan
5(23)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 28
Subtotal
Rp590.000
Arduino UNO R4 WIFI ORIGINAL MADE IN ITALY
Rp590.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Arduino
FEATURES :
☞ Hardware compatibility with UNO form factor
The UNO R4 WiFi maintains the same form factor, pinout, and 5 V operating voltage as its predecessor, the UNO R3, ensuring a seamless transition for existing shields and projects.
☞ Expanded memory and faster clock
The UNO R4 WiFi boasts increased memory and a faster clock speed, enabling more precise calculations and effortless handling of complex projects.
☞ Extra on-board peripherals
The UNO R4 WiFi introduces a range of on-board peripherals, including a 12-bit DAC, CAN BUS, and OP AMP, providing expanded capabilities and design flexibility.
☞ Extended 24 V tolerance
The UNO R4 WiFi supports a wider input voltage range, allowing seamless integration with motors, LED strips, and other actuators using a single power source.
☞ HID support
With built-in HID support, the UNO R4 WiFi can simulate a mouse or keyboard when connected to a computer via USB, making it easy to send keystrokes and mouse movements.
☞ Wi-Fi and Bluetooth
The UNO R4 WiFi hosts an ESP32-S3 module, enabling makers to add wireless connectivity to their projects. Combined with the Arduino IoT Cloud, makers can monitor and control their projects remotely.
☞ QWIIC connector
The UNO R4 WiFi features a Qwiic I2C connector, allowing easy connection to nodes from the extensive QWIIC ecosystem. Adapter cables also enable compatibility with sensors and actuators based on other connectors.
SPECIFICATION :
☞ MCU:Arm cortex M4
☞ Memory:256KB Flash/32KB SRAM
☞ Operating voltage:5V
☞ Input voltage:6-24V
☞ Clock speed:48MHz
☞ Programming port:USB-C
☞ WiFi/BLE:ESP32-S3-MINI
☞ LED Matrix:12x8(96 red LEDs)
☞ Additional connections :
Qwiic connector
OFF pin
VRTC pin
☞ Digital pins:14
☞ PWM:6
☞ ADC:6
☞ DAC:1(12bit)
☞ SPI:1
☞ I2C:2
☞ CAN:1
DOCUMENTS :
☞ https://github.com/May-DFRobot/DFRobot/blob/master/UNO%20R4%20WiFi-datasheet.pdf
☞ Hardware compatibility with UNO form factor
The UNO R4 WiFi maintains the same form factor, pinout, and 5 V operating voltage as its predecessor, the UNO R3, ensuring a seamless transition for existing shields and projects.
☞ Expanded memory and faster clock
The UNO R4 WiFi boasts increased memory and a faster clock speed, enabling more precise calculations and effortless handling of complex projects.
☞ Extra on-board peripherals
The UNO R4 WiFi introduces a range of on-board peripherals, including a 12-bit DAC, CAN BUS, and OP AMP, providing expanded capabilities and design flexibility.
☞ Extended 24 V tolerance
The UNO R4 WiFi supports a wider input voltage range, allowing seamless integration with motors, LED strips, and other actuators using a single power source.
☞ HID support
With built-in HID support, the UNO R4 WiFi can simulate a mouse or keyboard when connected to a computer via USB, making it easy to send keystrokes and mouse movements.
☞ Wi-Fi and Bluetooth
The UNO R4 WiFi hosts an ESP32-S3 module, enabling makers to add wireless connectivity to their projects. Combined with the Arduino IoT Cloud, makers can monitor and control their projects remotely.
☞ QWIIC connector
The UNO R4 WiFi features a Qwiic I2C connector, allowing easy connection to nodes from the extensive QWIIC ecosystem. Adapter cables also enable compatibility with sensors and actuators based on other connectors.
SPECIFICATION :
☞ MCU:Arm cortex M4
☞ Memory:256KB Flash/32KB SRAM
☞ Operating voltage:5V
☞ Input voltage:6-24V
☞ Clock speed:48MHz
☞ Programming port:USB-C
☞ WiFi/BLE:ESP32-S3-MINI
☞ LED Matrix:12x8(96 red LEDs)
☞ Additional connections :
Qwiic connector
OFF pin
VRTC pin
☞ Digital pins:14
☞ PWM:6
☞ ADC:6
☞ DAC:1(12bit)
☞ SPI:1
☞ I2C:2
☞ CAN:1
DOCUMENTS :
☞ https://github.com/May-DFRobot/DFRobot/blob/master/UNO%20R4%20WiFi-datasheet.pdf
Ada masalah dengan produk ini?