TIO1608-D2 YAMAHA DANTE DIGITAL STAGE BOX AUDIO I/O RACK TIO1608D2 / TIO 1608 D2 / TIO1608 D2 / TIO-1608D2 / TIO-1608-D2

YAMAHA TIO1608-D2100% ORIGINAL GARANSI RESMI YAMAHA MUSIK INDONESIASimplify your live sound or studio setup with the Yamaha Tio1608-D2, a Dante-compatible I/O rack equipped with 16 mic/line inputs and 8 line outputs. It can control gain from TF Series and DM3 consoles remotely, allowing the construction of a simple stagebox system. The versatile Tio1608-D2 also supports 96k, making it perfect for use as an I/O rack in large installations with products such as the RIVAGE PM or DME7.The Dante audio network standard is utilized in the DM3 and TF series as well as in the CL and QL digital mixers. These consoles can be freely combined with the Tio1608-D2 or an R series I/O rack to create a system that matches the required scale and budget. Patching can be enabled via “Dante Controller” while Remote HA can be controlled by “R Remote” software. The 2 RU Tio1608-D2 ships with standard IEC power cord and four rubber feet.Compatibility Yamaha TF / DM3Sample Rate 44.1, 48, 88.2, 96 kHzLatency THD (Measured with a -18 dB/Octave Filter at 80 kHz)Frequency Response +0.5, -1.5 dB 20 Hz to 20 kHz, Refer to the Nominal Output Level at 1 kHz, Input to OutputDynamic Range 108 dB, Input to Output, Gain = -6 dB / 110 dB, DA Converter, Fs 96 kHz108 dB, Input to Output, Gain = -6 dB / 112 dB, DA Converter, Fs 48 kHzEIN -128 dBu, Gain = +66 dB, Fs 96 kHz, 48 kHz (Measured with A-Weighting Filter)Noise Residual Output Noise: -86 dBu, Fs 96 kHz / -88 dBu, Fs 48 kHz, ST Main Off (Measured with A-Weighting Filter)Crosstalk -100 dB, Adjacent Input/Output Channels, Input Gain = -6 dB (Measured with a -30 dB/Octave Filter at 22 kHz)Gain -6 to +66 dBImpedance Actual Load Impedance: 7.5 KilohmsMic Input: 50 to 600 OhmsLine Input: 600 OhmsActual Source: 75 OhmsLine Output: 600 OhmsInput Level SensitivityMic: -82 dBu (61.6 μV)Line: +10 dBu (245 mV)NominalMic: -62 dBu (0.616 mV)Line: +10 dBu (2.45 V)Max Before ClippingMic: -42 dBu (6.16 mV)Line: +30 dBu (24.5 V)Output Level Nominal: +4 dBu (1.23 V)Maximum Before Clipping: +24 dBu (12.3 V)Inputs / OutputsAudio I/O 16x Combo XLR-1/4" 3-Pin Line/Mic Input8x XLR 3-Pin Line OutputDigital I/O Dante: 2 x etherCON Cat 5e (Primary and Secondary)Data Length: 24- or 32-BitLevel: 1000Base-TAudio:16 Channels (Tio1608-D2 to Other Devices)8 Channels (Other Devices to Tio1608-D2)PowerPower Source AC Input (Included)AC Input Power 100 to 240 VAC, 50 / 60 HzPower Consumption 50 WEnvironmentalOperating Temperature 32 to 104°F / 0 to 40°CStorage Temperature -4 to 140°F / -20 to 60°CPhysicalMounting Side: 4x RackmountMaterial of Construction MetalW 480mm (18.9”)H 88mm (3.5”)D 364mm (14.4”)Net weight: 5.7kg Accessories Owner’s Manual, Power Cord (2.5m), Rubber stoppers (4)