Atur jumlah dan catatan
Stok Total: 50
Subtotal
Rp58.000
Promo Sensor Apiflame Sensor
Rp58.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Halo selamat datang di toko Kami
SEMUA BARANG 99% READY STOCK JADI DIORDER AJA
ADA RESI = UDAH DI PROSES
UPDATE RESI DARI EKSPEDISI SORE ATAU MALAM !!
Pengiriman
SENIN-SABTU ORDER SBLM 16.00 DIUSAHAKAN DIKIRIM DIHARI YANG SAMA !!
JIKA ORDERAN OVER BISA H+1-3 NO RUSH NO CANCEL NO UBAH ALAMAT
HARAP DI BACA UNTUK KOMPLAIN KURANG DAN RUSAK !!!
SEGALA JENIS KOMPLAIN HARUS DISERTAI VIDEO UNBOXING DARI AWAL BELUM BUKA SAMPAI AKHIR HITUNG DAN TEST TANPA TERPOTONG
TIDAKK ADA VIDEO / PAKET UDAH TERBUKA BARU VIDEO = TAK BISA KOMPLAIN !
HAPPY SHOPPING ! Module Features:
1, you can detect a flame or a wavelength within the 760 nm to 1100 nm range of the light source, the test flame lighter distance 80cm, for the greater flame, farther test distance
of about 2, detection angle of 60 degrees, particularly sensitive to flame photometry
3, sensitivity adjustable (shown in blue digital potentiometer adjustment)
4, the comparator output signal clean, good waveform, driving ability, more than 15mA
5, with adjustable precision potentiometer sensitivity adjustment
6, the working voltage of 3.3V-5V
7, Output form: DO digital switching output (0 and 1) and AO analog voltage output
8, a fixing bolt hole, easy installation
9, small plates PCB Size: 3.2 cm x 1.4cm
10, using a wide voltage comparator LM393
Wiring Product Description:
1. VCC positive power supply 3.3-5V
2. GND power supply is negative
3. DO TTL switching signal output
4. AO Analog Output
Module for use:
1, the flame sensor to the flame of the most sensitive to ordinary light is also a reaction, usually used as a flame alarm purposes.
2, a small plate output interface can be directly connected to the microcontroller IO port
3, the sensor and the flame to maintain a certain distance, so as not to damage the temperature sensor, the flame of a lighter test distance of 80cm, to the flame, the more distant the test distance
4, a small plate simulation output mode and the AD conversion process, can achieve higher accuracy
5, when the sensor detects a flame, sunlight, or infrared light, to reach the threshold set by the potentiometer, the green indicator will light, DO and output low level (about 0-0.1V), the green light is not on, then DO high output voltage of about 3v Terima Kasih Sudah Berkunjung Di Toko Kami
Semoga Puas Dengan Pelayanan Kami
SEMUA BARANG 99% READY STOCK JADI DIORDER AJA
ADA RESI = UDAH DI PROSES
UPDATE RESI DARI EKSPEDISI SORE ATAU MALAM !!
Pengiriman
SENIN-SABTU ORDER SBLM 16.00 DIUSAHAKAN DIKIRIM DIHARI YANG SAMA !!
JIKA ORDERAN OVER BISA H+1-3 NO RUSH NO CANCEL NO UBAH ALAMAT
HARAP DI BACA UNTUK KOMPLAIN KURANG DAN RUSAK !!!
SEGALA JENIS KOMPLAIN HARUS DISERTAI VIDEO UNBOXING DARI AWAL BELUM BUKA SAMPAI AKHIR HITUNG DAN TEST TANPA TERPOTONG
TIDAKK ADA VIDEO / PAKET UDAH TERBUKA BARU VIDEO = TAK BISA KOMPLAIN !
HAPPY SHOPPING ! Module Features:
1, you can detect a flame or a wavelength within the 760 nm to 1100 nm range of the light source, the test flame lighter distance 80cm, for the greater flame, farther test distance
of about 2, detection angle of 60 degrees, particularly sensitive to flame photometry
3, sensitivity adjustable (shown in blue digital potentiometer adjustment)
4, the comparator output signal clean, good waveform, driving ability, more than 15mA
5, with adjustable precision potentiometer sensitivity adjustment
6, the working voltage of 3.3V-5V
7, Output form: DO digital switching output (0 and 1) and AO analog voltage output
8, a fixing bolt hole, easy installation
9, small plates PCB Size: 3.2 cm x 1.4cm
10, using a wide voltage comparator LM393
Wiring Product Description:
1. VCC positive power supply 3.3-5V
2. GND power supply is negative
3. DO TTL switching signal output
4. AO Analog Output
Module for use:
1, the flame sensor to the flame of the most sensitive to ordinary light is also a reaction, usually used as a flame alarm purposes.
2, a small plate output interface can be directly connected to the microcontroller IO port
3, the sensor and the flame to maintain a certain distance, so as not to damage the temperature sensor, the flame of a lighter test distance of 80cm, to the flame, the more distant the test distance
4, a small plate simulation output mode and the AD conversion process, can achieve higher accuracy
5, when the sensor detects a flame, sunlight, or infrared light, to reach the threshold set by the potentiometer, the green indicator will light, DO and output low level (about 0-0.1V), the green light is not on, then DO high output voltage of about 3v Terima Kasih Sudah Berkunjung Di Toko Kami
Semoga Puas Dengan Pelayanan Kami
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan