Grove Temperature Sensor module

Grove Temperature Sensor This module is very suitable for use with Arduino and Raspberry Pi It is a temperature sensor module that uses a temperature thermistor in the surrounding environment. The thermistor resistance will change according to the detected temperature. This change in resistance is then used as a reference to determine the analog voltage output which can then be directly accessed by the microcontroller. Specification: - Dimensions: 24 x 20 x 9.8 mm - Working Voltage: 3.3 - 5V - Zero Power Thermistor Resistance: 100 KOhm - Resistance Tolerance: ±1% - Thermistor: NCP18WF104F03RC (NTC) - Nominal B-Constant: 4250 - 4299K - Temperature Range:-40°C - 125°C - Accuracy: ± 1.5°C Datasheet : http://wiki.seeedstudio.com/Grove-Temperature_Sensor_V1.2/ ===== Modul ini sangat cocok digunakan dengan Arduino dan Raspberry Pi Merupakan modul sensor suhu yang menggunakan thermistor suhu di lingkungan sekitar. Resistansi thermistor akan berubah susuai suhu yang terdeteksi. Perubahan resistansi tersebut kemudian dijadikan acuan untuk menentukan output tegangan analog yang kemudian dapat langsung diakses oleh mikrokontroler. Spesifikasi: - Dimensi: 24 x 20 x 9.8 mm - Tegangan Kerja: 3.3 - 5V - Resistansi Zero Power Thermistor: 100 KOhm - Toleransi Resistansi: ±1% - Thermistor: NCP18WF104F03RC (NTC) - Nominal B-Constant: 4250 - 4299K - Rentang Temperatur:-40°C - 125°C - Akurasi: ± 1.5°C Datasheet : http://wiki.seeedstudio.com/Grove-Temperature_Sensor_V1.2/