HN11-I101 Bearing set for Dynamixel XL 430 series

HN11-I101 Bearing set for Dynamixel XL 430 series

a standard set of bearings for the Dynamixel XL430 series. This bearing is connected to the opposite side of the Dynamixel XL430 output shaft and can also be used to mount a hinge over it.

The HN11-I101 has a hollow structure making it possible to assemble the Dynamixel without screws. This product is compatible with the Dynamixel XL430 , XC430, 2XL430 , and 2XC430.

Package Received:

Idler (HN11-I101) (1x)
Idler Cap (HN11-I101) (1x)
Bolt (FHS M3*5) (1x)
Bolt (PHS M2*5) (5x)
Features:

Idller: It is fastened to the Dynamixel using a hook mechanism and there is an additional frame so that the hinge can be attached to it.
Idler Cap: Has a perforated structure for the insertion of screws to protect the Dynamixel.
Attention:

Ensure that the cables do not snag when installing the bearings and avoid tangled cables as this can cause communication errors.

Documents :


http://en.robotis.com/service/compatibility_table.php?cate=dx

satu set bantalan standar untuk seri Dynamixel XL430. Bantalan ini terhubung ke sisi berlawanan dari poros keluaran Dynamixel XL430 dan juga dapat digunakan untuk memasang engsel di atasnya.

HN11-I101 memiliki struktur berlubang sehingga Dynamixel dapat dirakit tanpa sekrup. Produk ini kompatibel dengan Dynamixel XL430, XC430, 2XL430, dan 2XC430.

Paket Diterima:

Pemalas (HN11-I101) (1x)
Tutup Pemalas (HN11-I101) (1x)
Baut (FHS M3 * 5) (1x)
Baut (PHS M2 * 5) (5x)
Fitur:

Idller: Diikat ke Dynamixel menggunakan mekanisme kait dan ada bingkai tambahan sehingga engsel bisa dipasang padanya.
Idler Cap: Memiliki struktur berlubang untuk penyisipan sekrup guna melindungi Dynamixel.
Perhatian:

Pastikan kabel tidak tersangkut saat memasang bearing dan hindari kabel kusut karena dapat menyebabkan kesalahan komunikasi.