Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp100.000
Human Micro-Motion Detection mmWave Sensor 24GHz mmWave Radar Technology Based on S3KM1110 FMCW
Rp100.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Electronic Module
Human Micro-Motion Detection mmWave Sensor 24GHz mmWave Radar Technology Based on S3KM1110 FMCW
The mmWave HMMD sensor is a millimeter wave radar sensor that uses FMCW (Frequency Modulated Continuous Wave) technology to detect human presence and movement. With an operating frequency of 24 GHz, this sensor is able to detect activities such as standing, walking, or leaving an area within a certain range. Its advantages include environmental resistance, the ability to detect through thin barriers, and low power consumption, making it ideal for AIoT applications such as automatic lighting systems, intelligent security systems, smart homes, elderly care, etc.
Features:
- Based on the S3KM1110 mmWave AIoT Sensor SoC, with a high-performance 24GHz 1T1R onboard antenna
- Equipped with onboard MCU and human micro-motion detection algorithm to accurately detect movement, standing, standing.
- Provides UART communication protocol, supports easy-to-operate configuration of detection distance, sensitivity, and absence report delay.
- Supports output via UART port and GPIO header, to connect to microcontrollers such as Arduino and Raspberry Pi.
- Wide motion detection range, supports top-mounted and wall-mounted detection.
- Compatible with Raspberry Pi/RP2040/Arduino/ESP32/Jetson Nano.
Specifications:
Frequency: 24~24.25GHz
Bandwidth: 0.25GHz
Modulation: FMCW
Power supply: 3.3V DC
Interface: UART & GPIO
UART baudrate: 115200bps (default)
Ambient temperature: -40~85°C
Dimensions: 20×20mm
System performance:
Detection distance (wall-mounted):
Human movement target: 10m
Human micro-motion target: 6m
Detection distance (top-mounted):
Human movement target: 5m
Human micro-motion target: 4m
Resolution: 0.7m
Detection angle: ±60°
Detection accuracy: 0.15m (moving target within 10m radial distance from radar)
Average current: 50mA
Data refresh cycle: 100ms
Application examples:
- Smart Security System: Detect intrusion or human presence in an area.
- Home Automation & IoT: Control lights, air conditioners, or other devices based on human presence.
- Elderly & Patient Monitoring: Ensure the presence of patients or elderly in a room.
- Smart Vehicle System: Used in automated parking or collision avoidance systems.
- Room & Building Management: Count the number of people in an area for energy efficiency and ventilation.
Documents:
WIKI: http://www.waveshare.com/wiki/HMMD_mmWave_Sensor
=====
Sensor HMMD mmWave adalah sensor radar gelombang milimeter yang menggunakan teknologi FMCW (Frequency Modulated Continuous Wave) untuk mendeteksi keberadaan dan pergerakan manusia. Dengan frekuensi operasi 24 GHz, sensor ini mampu mendeteksi aktivitas seperti diam, berjalan, atau meninggalkan area dalam jangkauan tertentu. Keunggulannya meliputi ketahanan terhadap kondisi lingkungan, kemampuan mendeteksi melalui penghalang tipis, dan konsumsi daya rendah, menjadikannya ideal untuk aplikasi AIoT seperti sistem penerangan otomatis, sistem pengamanan cerdas, smart home, perawatan lansia, dll.
Fitur :
- Berbasis AIoT mmWave Sensor SoC S3KM1110, dengan antena onboard 24GHz 1T1R berkinerja tinggi
- Dilengkapi MCU onboard dan algoritma deteksi gerak mikro manusia untuk mendeteksi pergerakan, diam, berdiri secara akurat.
- Menyediakan protokol komunikasi UART, mendukung konfigurasi jarak deteksi, sensitivitas, dan delay laporan ketidakhadiran yang mudah dioperasikan.
- Mendukung output melalui port UART dan header GPIO, untuk terhubung ke mikrokontroller seperti Arduino dan Raspberry Pi.
- Jarak deteksi pergerakan yang luas, mendukung deteksi pemasangan di atas (top-mounted) dan di dinding (wall-mounted).
- Kompatibel dengan Raspberry Pi/RP2040/Arduino/ESP32/Jetson Nano.
Spesifikasi :
Frekuensi : 24~24.25GHz
Bandwidth : 0.25GHz
Modulasi : FMCW
Catu daya : 3.3V DC
Antarmuka : UART & GPIO
UART baudrate : 115200bps (default)
Suhu lingkungan : -40~85°C
Dimensi : 20×20mm
Performa sistem :
Jarak deteksi (wall-mounted) :
Target pergerakan manusia : 10m
Target gerak mikro manusia : 6m
Jarak deteksi (top-mounted) :
Target pergerakan manusia: 5m
Target gerak mikro manusia : 4m
Resolusi : 0.7m
Sudut deteksi : ±60°
Akurasi deteksi : 0.15m (target bergerak dalam jarak radial 10m dari radar)
Arus rata-rata : 50mA
Data refresh cycle : 100ms
Contoh aplikasi :
- Sistem Keamanan Pintar: Deteksi intrusi atau keberadaan manusia di suatu area.
- Otomasi Rumah & IoT: Mengontrol lampu, AC, atau perangkat lain berdasarkan keberadaan manusia.
- Pemantauan Lansia & Pasien: Memastikan keberadaan pasien atau lansia dalam suatu ruangan.
- Sistem Kendaraan Pintar: Digunakan dalam parkir otomatis atau sistem penghindaran tabrakan.
- Manajemen Ruangan & Gedung: Menghitung jumlah orang dalam suatu area untuk efisiensi energi dan ventilasi.
Dokumen :
WIKI : http://www.waveshare.com/wiki/HMMD_mmWave_Sensor
The mmWave HMMD sensor is a millimeter wave radar sensor that uses FMCW (Frequency Modulated Continuous Wave) technology to detect human presence and movement. With an operating frequency of 24 GHz, this sensor is able to detect activities such as standing, walking, or leaving an area within a certain range. Its advantages include environmental resistance, the ability to detect through thin barriers, and low power consumption, making it ideal for AIoT applications such as automatic lighting systems, intelligent security systems, smart homes, elderly care, etc.
Features:
- Based on the S3KM1110 mmWave AIoT Sensor SoC, with a high-performance 24GHz 1T1R onboard antenna
- Equipped with onboard MCU and human micro-motion detection algorithm to accurately detect movement, standing, standing.
- Provides UART communication protocol, supports easy-to-operate configuration of detection distance, sensitivity, and absence report delay.
- Supports output via UART port and GPIO header, to connect to microcontrollers such as Arduino and Raspberry Pi.
- Wide motion detection range, supports top-mounted and wall-mounted detection.
- Compatible with Raspberry Pi/RP2040/Arduino/ESP32/Jetson Nano.
Specifications:
Frequency: 24~24.25GHz
Bandwidth: 0.25GHz
Modulation: FMCW
Power supply: 3.3V DC
Interface: UART & GPIO
UART baudrate: 115200bps (default)
Ambient temperature: -40~85°C
Dimensions: 20×20mm
System performance:
Detection distance (wall-mounted):
Human movement target: 10m
Human micro-motion target: 6m
Detection distance (top-mounted):
Human movement target: 5m
Human micro-motion target: 4m
Resolution: 0.7m
Detection angle: ±60°
Detection accuracy: 0.15m (moving target within 10m radial distance from radar)
Average current: 50mA
Data refresh cycle: 100ms
Application examples:
- Smart Security System: Detect intrusion or human presence in an area.
- Home Automation & IoT: Control lights, air conditioners, or other devices based on human presence.
- Elderly & Patient Monitoring: Ensure the presence of patients or elderly in a room.
- Smart Vehicle System: Used in automated parking or collision avoidance systems.
- Room & Building Management: Count the number of people in an area for energy efficiency and ventilation.
Documents:
WIKI: http://www.waveshare.com/wiki/HMMD_mmWave_Sensor
=====
Sensor HMMD mmWave adalah sensor radar gelombang milimeter yang menggunakan teknologi FMCW (Frequency Modulated Continuous Wave) untuk mendeteksi keberadaan dan pergerakan manusia. Dengan frekuensi operasi 24 GHz, sensor ini mampu mendeteksi aktivitas seperti diam, berjalan, atau meninggalkan area dalam jangkauan tertentu. Keunggulannya meliputi ketahanan terhadap kondisi lingkungan, kemampuan mendeteksi melalui penghalang tipis, dan konsumsi daya rendah, menjadikannya ideal untuk aplikasi AIoT seperti sistem penerangan otomatis, sistem pengamanan cerdas, smart home, perawatan lansia, dll.
Fitur :
- Berbasis AIoT mmWave Sensor SoC S3KM1110, dengan antena onboard 24GHz 1T1R berkinerja tinggi
- Dilengkapi MCU onboard dan algoritma deteksi gerak mikro manusia untuk mendeteksi pergerakan, diam, berdiri secara akurat.
- Menyediakan protokol komunikasi UART, mendukung konfigurasi jarak deteksi, sensitivitas, dan delay laporan ketidakhadiran yang mudah dioperasikan.
- Mendukung output melalui port UART dan header GPIO, untuk terhubung ke mikrokontroller seperti Arduino dan Raspberry Pi.
- Jarak deteksi pergerakan yang luas, mendukung deteksi pemasangan di atas (top-mounted) dan di dinding (wall-mounted).
- Kompatibel dengan Raspberry Pi/RP2040/Arduino/ESP32/Jetson Nano.
Spesifikasi :
Frekuensi : 24~24.25GHz
Bandwidth : 0.25GHz
Modulasi : FMCW
Catu daya : 3.3V DC
Antarmuka : UART & GPIO
UART baudrate : 115200bps (default)
Suhu lingkungan : -40~85°C
Dimensi : 20×20mm
Performa sistem :
Jarak deteksi (wall-mounted) :
Target pergerakan manusia : 10m
Target gerak mikro manusia : 6m
Jarak deteksi (top-mounted) :
Target pergerakan manusia: 5m
Target gerak mikro manusia : 4m
Resolusi : 0.7m
Sudut deteksi : ±60°
Akurasi deteksi : 0.15m (target bergerak dalam jarak radial 10m dari radar)
Arus rata-rata : 50mA
Data refresh cycle : 100ms
Contoh aplikasi :
- Sistem Keamanan Pintar: Deteksi intrusi atau keberadaan manusia di suatu area.
- Otomasi Rumah & IoT: Mengontrol lampu, AC, atau perangkat lain berdasarkan keberadaan manusia.
- Pemantauan Lansia & Pasien: Memastikan keberadaan pasien atau lansia dalam suatu ruangan.
- Sistem Kendaraan Pintar: Digunakan dalam parkir otomatis atau sistem penghindaran tabrakan.
- Manajemen Ruangan & Gedung: Menghitung jumlah orang dalam suatu area untuk efisiensi energi dan ventilasi.
Dokumen :
WIKI : http://www.waveshare.com/wiki/HMMD_mmWave_Sensor
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan